Address Book & Text Messaging
Creating a New Contact
1. From the home screen, tap > .
2. Tap .
3. Enter the contact name, phone numbers,
email addresses, and other information,
as shown.
4. Tap to save the contact.
Importing Contacts in Batches
1. From the home screen, tap > .
2. Tap > Import/Export > Import
from storage.
3. Select an account in which to save
the contacts.
4. If prompted, choose to import one,
multiple, or all vCard les.
Sending a Text Message
1. From the home screen, tap > .
2. Enter the recipient(s) and message text.
If you want to send an MMS, tap to
add attachments.
3. Tap SEND to send the message.
NOTE: You can also press the Messaging Key
to launch Messaging.
Please don’t text and drive.
Installing a microSDHC™ Card
The microSDHC card can be installed and removed
while the phone is turned on. Unmount the microSDHC
card before removing it.
1. Place your nger in the slot at the bottom of the
back cover to lift and remove the cover. If the battery
is installed, remove it.
2. Hold your microSDHC card with the metal contacts
facing down and slide it into the microSDHC
card slot.
3. Insert the battery by aligning the metal contacts on
the battery with the metal contacts in the battery
compartment. Gently push down on the battery
until it clicks into place.
4. Gently press the cover back into place following
the sequence shown here.
Charging the Battery
Your phone’s battery should have enough power for the
phone to turn on, nd a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING! Use only ZTE-approved chargers and cables.
The use of unapproved accessories could damage your phone
or cause the battery to explode.
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC wall outlet. If the phone is on,
you’ll see a charging icon, such as or , appear in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
Setting Up Your Phone
Getting to Know Your Phone
Notications
Touch Screen and Navigation Keys
Playing Music
Connectivity
Internet
Calling and Voicemail
Customizing Home Screens
Google Play™
Camera and Video
• Power/End Key: Press and hold to power
on/o, restart the phone, or turn on/o airplane
mode. Press to end/cancel a call or to return to
the home screen.
• Home Key: Press to return to the home screen
from any application or screen. Press and hold to
access Google Now™.
• Recent Apps Key: View recently used apps.
• Back Key: Go to the previous screen.
• Volume Key: Turn the volume up or down.
•
Speaker Key: Turn speakerphone on/o during a call.
• Camera Key: Launch the camera or take a picture
when the Camera app is already launched.
• Customizable Key: Launch the assigned application
(Music by default). Press and hold to change the
assigned application.
• Messaging Key: Launch Messaging.
• Send Key: Launch the phone app or place a call.
• Delete Key: Delete text before the cursor.
• 4-Way Navigation Key: Press up/down/left/right
to highlight items on the touch screen or move
the cursor.
• OK Key: Select a highlighted item on the screen.
Opening Applications
1. Press
if the current screen is not the home
screen.
2. Tap , then swipe left on the screen and tap an
app to open it.
1. From the home screen, tap > .
NOTE: You can also press the Customizable Key to launch Music from
any screen.
2. Tap All Songs.
3. Tap a song to play it.
Return to the
music library
Access additional
options
Album artwork
and lyrics
(if available)
Playback control:
Skip songs or pause
and resume playback
Toggle shue mode
View playlist
Toggle repeat mode
Check the track
information
Connecting via Wi-Fi®
1. From the home screen, tap > > Wi-Fi.
2. Slide the on/o switch if Wi-Fi is o. Your
phone automatically searches for Wi-Fi
networks in range and displays their names
and security settings. Your phone also
connects to previously linked networks
when they are in range.
3. Tap a network name to connect to it.
4. If the network is secured, enter a password
or other credentials (ask your network
administrator for details) and tap CONNECT.
Connecting via Mobile Network
1. From the home screen, tap > >
Mobile networks.
2. Slide next to Mobile Data to enable
mobile data.
Setting Up Gmail™
1. From the home screen, tap > >
Add an email address > Google.
NOTE: If another Gmail account is already
set up, press > > > Accounts >
Add account > Google.
2. Enter your existing Google email or tap
Or create a new account.
3. Follow the instructions on the screen to set
up the account.
Setting Up Email
1. From the home screen, tap and select an
email server.
NOTE: If another email account is already
set up, press > > > Accounts >
Add account > Email.
2. Enter the email address and password.
3. Tap Next and follow the on-screen
instructions.
Connecting With a Bluetooth® Headset
Turn on the Bluetooth headset and switch it
to pairing mode. Refer to the headset’s user
guide for more information.
1. From the home screen, tap > >
Bluetooth.
2. Slide the on/o switch if Bluetooth is o.
When Bluetooth is on, the icon appears in
the status bar.
NOTE: Your phone automatically scans for
and displays the IDs of all available Bluetooth
devices in range. You could tap > Refresh
if you wanted to scan again.
3. Tap the ID of the headset, or any other
device you want to pair with your phone.
Enter a passcode if prompted.
4. If necessary, tap the ID of the paired headset
to connect with it.
TIP: Tap > FORGET to end the connection.
Google Play has tens of thousands of games and
applications for you to enjoy. Before you begin,
make sure that you are signed in to your Google
account.
1. From the home screen, tap .
2. Find the apps you need either by category or
by typing in the search eld.
3. Tap the app to see a more detailed description.
4. Tap INSTALL (free apps) or the price (paid
apps).
NOTE: A payment method (such as Google
Wallet™) is required to purchase apps.
5. Read the app permissions and tap ACCEPT.
CAUTION: Once installed, some apps can
access many functions of a signicant amount
of your personal data. The Play Store will show
you what the app can access.
6. For paid apps follow additional on-screen
instructions for payment.
7. Wait for the app to be downloaded and
installed automatically. Payment needs
to be authorized before paid apps start
downloading.
8. The app is successfully installed when the
icon appears in the status bar. You can nd the
new app after pressing > .
NOTE: The content you can access in the Play Store depends on your region
and your service provider.
Taking a Photo
1. From the home screen, tap .
NOTE: You can also press the Camera Key from the home or apps screen
to launch the Camera app.
2. Aim the camera at the subject and make any necessary adjustments.
3. Tap .
Recording a Video
1. From the home screen, tap .
2. Aim the camera at the subject and make any necessary adjustments.
3. Tap to start and to stop recording.
TIP: While the recording is in progress, you can tap
to save the frame as
a photo.
Change the
camera settings
View your photos
and videos
Capture a photo
Record a video
Switch between the front
and back cameras
Select a camera mode for
the back camera
Set a time delay
before the camera
takes a picture
The status bar at the top of the home screen provides phone and service
status icons, and notication icons.
Phone and Service Status Icons
1x
2G connected
3G connected
4G LTE connected
Ringer o
Vibration mode
Priority mode
Battery low
Battery partially drained
Battery full
/
Battery charging
New SMS
New MMS
/
New email
/
New Gmail message(s)
Missed call
Call in progress
/
Song playing
Making a Call
1. From the home screen, enter the phone
number with the keypad. Press the
Delete Key to delete incorrect digits.
2. Press the Send Key to place the call.
NOTE: As you enter digits, your phone
searches for contacts that match and
displays them on the screen. Simply tap
to make the call.
Checking Voicemail
1. From the home screen, enter the phone
number with the keypad.
2. Press and hold the 1 Key. If prompted,
enter your voicemail password.
3. Follow the voice prompts to listen to
and manage your voicemail messages.
NOTE: For detailed information, please contact
the service provider.
You can customize your home screen by adding
shortcuts, folders, widgets, and more.
Adding Widgets
1. Press and hold an empty spot on a home screen.
2. Tap Widgets.
3. Press and hold a widget and drag it to the desired
home screen.
NOTE: To add a shortcut to a home screen, press
and hold the app from the App Tray and drag it to
a home screen.
Removing Widgets or Shortcuts
1. Press and hold a widget or shortcut on the
home screen.
2. Drag it to to remove it.
Organizing Shortcuts With Folders
1. Press and hold a shortcut.
2. Drag it to at the top of the screen. A new
folder is created.
3. If needed, drag more shortcuts and drop them
into the folder.
Applying New Wallpapers
1. Press and hold an empty spot on a home screen.
2. Tap Wallpapers.
3. Select a wallpaper source (GALLERY or LIVE
WALLPAPER) and choose an image or tap a
wallpaper thumbnail image.
4. Follow the instructions on the screen.
For Your Safety
For Your Safety (continued)
FCC RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the United States.
During SAR testing, this device was set to transmit at its highest certied power level in all tested frequency
bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near
the body with the separation of 0.4 inches (10 mm). Although the SAR is determined at the highest certied
power level, the actual SAR level of the device while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
This device complies with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and
has been tested in accordance with the measurement methods and procedures specied in IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on le with the
FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
SRQ-Z353VL.
For this device, the highest reported SAR value for usage against the head is 0.49 W/kg, for usage near the body
is 0.96 W/kg.
While there may be dierences between the SAR levels of various phones and at various positions, they all meet
the government requirements.
SAR compliance for body-worn operation is based on a separation distance of 0.6 inches (15 mm) between
the unit and the human body. Carry this device at least 0.6 inches (15 mm) away from your body to ensure RF
exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips
or holsters, which do not contain metallic components, to maintain a separation of 0.6 inches (15 mm) between
this device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certied, and
use such body-worn accessory should be avoided.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Hearing Aid Compatibility (HAC) Regulations for Mobile Phones
In 2003, the FCC adopted rules to make digital wireless telephones compatible with hearing aids and cochlear
implants. Although analog wireless phones do not usually cause interference with hearing aids or cochlear
implants, digital wireless phones sometimes do because of electromagnetic energy emitted by the phone’s
antenna, backlight, or other components. Your phone is compliant with FCC HAC regulations (ANSI C63.19-2011).
While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users
may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of interference they generate. The wireless telephone
industry has developed ratings for some of their mobile phones to assist hearing device users in nding phones
that may be compatible with their hearing devices. Not all phones have been rated. Phones that have been rated
have a label on the box. These ratings are not guaranteed. Results will vary, depending on the level of immunity
of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal needs.
This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it
uses. However, there may be some newer wireless technologies used in this phone that have not been tested
yet for use with hearing aids. It is important to try the dierent features of this phone thoroughly and in dierent
locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult
your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have
questions about return or exchange policies, consult your service provider or phone retailer.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference with
hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s
telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note
that not all hearing devices contain telecoils.)
Your Z353VL has been tested for hearing aid device compatibility and has an M4/T4 rating.
Hearing devices may also be measured for immunity to this type of interference. Your hearing device
manufacturer or hearing health professional may help you nd results for your hearing device.
For additional information about the FCC’s actions with regard to hearing aid compatible wireless devices and
other steps the FCC has taken to ensure that individuals with disabilities have access to telecommunications
services, please go to www.fcc.gov/cgb/dro.
Distraction
Driving
Full attention must be given to driving at all times in order to reduce the risk of an accident. Using a phone while
driving (even with a hands free kit) can cause distraction and lead to an accident. You must comply with local
laws and regulations restricting the use of wireless devices while driving.
Operating Machinery
Full attention must be given to operating machinery in order to reduce the risk of an accident.
Product Handling
General Statement on Handling and Use
You alone are responsible for how you use your phone and any consequences of its use.
You must always turn o your phone wherever the use of a phone is prohibited. Use of your phone is subject to
safety measures designed to protect users and their environment.
• Always treat your phone and its accessories with care and keep it in a clean and dust-free place.
• Keep the screen and camera lens clean. Unclean screen or camera lens may slow down the phone’s reaction to
your operations or lower image quality.
• Clean the device and its accessories with a soft material such as cleaning cloth for eyeglass lenses. Do not use
alcohol or other corrosive substances for cleaning or allow them to get inside.
• Do not expose your phone or its accessories to open ames or lit tobacco products.
• Do not expose your phone or its accessories to liquid, moisture or high humidity.
• Do not drop, throw or try to bend your phone or its accessories.
• Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
• Do not paint your phone or its accessories.
• Do not attempt to disassemble your phone or its accessories. Only authorized personnel can do so.
• Do not expose or use your phone or its accessories in an environment with or that can reach extreme
temperatures, minimum - [5] and maximum + [50] degrees Celsius.
• Do not place your phone inside or near heating equipment or high-pressure containers, such as water heaters,
microwave ovens, or hot cooking utensils. Otherwise, your phone may be damaged.
• Please check local regulations for disposal of electronic products.
• Do not carry your phone in your back pocket as it could break when you sit down.
Small Children
Do not leave your phone and its accessories within the reach of small children or allow them to play with it. They
could hurt themselves or others, or could accidentally damage the phone. Your phone contains small parts with
sharp edges that may cause an injury or may become detached and create a choking hazard.
Demagnetization
To avoid the risk of demagnetization, do not allow electronic devices or magnetic media to be close to your
phone for a long time.
Electrostatic Discharge (ESD)
Do not touch the SIM/SD card’s metal connectors.
Antenna
Do not touch the antenna unnecessarily.
Normal Use Position
When placing or receiving a phone call, hold your phone to your ear, with the bottom towards your mouth.
Air Bags
Do not place a phone in the area over an air bag or in the air bag deployment area as an airbag inates with
great force and serious injury could result. Store the phone safely before driving your vehicle.
Seizures/Blackouts
The phone can produce a bright or ashing light. A small percentage of people may be susceptible to blackouts
or seizures (even if they have never had one before) when exposed to ashing lights or light patterns such as
when playing games or watching video. If you have experienced seizures or blackouts or have a family history of
such occurrences, please consult a physician. To reduce the risk of blackouts or seizures, you can use your phone
in a well-lit room and take frequent breaks.
Repetitive Strain Injuries
To minimize the risk of Repetitive Strain Injury (RSI) when texting or playing games with your phone:
• Do not grip the phone too tightly.
• Press the buttons lightly.
• Use the special features that are designed to minimize the times of pressing buttons, such as Message
Templates and Predictive Text.
• Take many breaks to stretch and relax.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, which cannot guarantee connection in all
conditions. Therefore, you must never rely solely on any wireless phone for emergency communications.
Loud Noise
This phone is capable of producing loud noises, which may damage your hearing. Turn down the volume before
using headphones, Bluetooth stereo headsets or other audio devices.
Phone Heating
Your phone may become warm during charging and during normal use.
Electrical Safety
Accessories
Use only approved accessories. Do not connect with incompatible products or accessories. Take care not to
touch or allow metal objects, such as coins or key rings, to contact or short-circuit the charging jack terminals.
Never puncture the surface of the phone with sharp objects.
Connection to Vehicles
Seek professional advice when connecting a phone interface to the vehicle electrical system.
Faulty and Damaged Products
Do not attempt to disassemble the phone or its accessories. Only qualied personnel can service or repair the
phone or its accessories. If your phone (or its accessories) has been submerged in water, punctured, or subjected
to a severe fall, do not use it until you have taken it to be checked at an authorized service center.
CTIA Requirements
• Do not disassemble or open, crush, bend or deform, puncture, or shred the battery.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to
water or other liquids, expose to re, explosion or other hazard.
• Only use the battery for the system for which it is specied.
• Only use the battery with a charging system that has been qualied with the system per CTIA Certication
Requirements for Battery System Compliance to IEEE 1725. Use of an unqualied battery or charger may
present a risk of re, explosion, leakage, or other hazard.
• Do not short-circuit a battery or allow metallic conductive objects to contact battery terminals.
• Replace the battery only with another battery that has been qualied with the system per this standard, IEEE-
Std-1725. Use of an unqualied battery may present a risk of re, explosion, leakage or other hazard.
• Promptly dispose of used batteries in accordance with local regulations.
• Battery usage by children should be supervised.
• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the
user suspects damage, take it to a service center for inspection.
• Improper battery use may result in a re, explosion, or other hazard.
• The phone shall only be connected to CTIA certied adapters, products that bear the USB-IF logo or products
that have completed the USB-IF compliance program.
Radio Frequency Interference
General Statement on Interference
Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers
and hearing aids. Please consult your doctor and the device manufacturers to determine if the operation of your
phone may interfere with the operation of your medical devices.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile
phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this, use the phone on
the opposite ear to your pacemaker and do not carry it in a breast pocket.
Hearing Aids
People with hearing aids or other cochlear implants may experience interfering noises when using wireless
devices or when one is nearby. The level of interference will depend on the type of hearing device and the
distance from the interference source. Increasing the separation between them may reduce the interference.
You may also consult your hearing aid manufacturer to discuss alternatives.
Medical Equipment
Turn o your wireless device when requested to do so in hospitals, clinics or healthcare facilities. These requests
are designed to prevent possible interference with sensitive medical equipment.
Aircraft
Turn o your wireless device whenever you are instructed to do so by airport or airline sta. Consult the airline
sta about the use of wireless devices onboard the aircraft. If your device oers airplane mode, this must be
enabled prior to boarding an aircraft.
Interference in Vehicles
Please note that because of possible interference with electronic equipment, some vehicle manufacturers forbid
the use of mobile phones in their vehicles unless a hands-free kit with an external antenna is included in the
installation.
Explosive Environments
Gas Stations and Explosive Atmospheres
In locations with potentially explosive atmospheres, obey all posted signs to turn o wireless devices such as
your phone or other radio equipment. Areas with potentially explosive atmospheres include fueling areas, below
decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles,
such as grain, dust, or metal powders.
Blasting Caps and Areas
Power o your mobile phone or wireless device when in a blasting area or in areas posted power o “two-way
radios” or “electronic devices” to avoid interfering with blasting operations.
Copyright © 2016 ZTE CORPORATION. All rights reserved.
No part of this publication may be quoted, reproduced, translated or used in any form or by any means,
electronic or mechanical, including photocopying and microlm, without the prior written permission of ZTE
Corporation. ZTE Corporation reserves the right to make modications on print errors or update specications
without prior notice. We oer self-service for our smart terminal device users. Please visit the ZTE ocial website
(at http://www.ztedevice.com) for more information on self-service and supported product models. Information
on the website takes precedence. ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modications of the software. Images and screenshots used in this guide may dier
from the actual product. Content in this guide may dier from the actual product or software. This guide is
published by ZTE Corporation.
ZTE, Cymbal, and the ZTE logos are trademarks of ZTE Corporation. Google and Android are trademarks of
Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such
trademarks by ZTE Corporation is under license. The microSDHC™ logo is a trademark of SD-3C, LLC. Other
trademarks and trade names are the property of their respective owners. Qualcomm and Snapdragon are
trademarks of Qualcomm Incorporated, registered in the United States and other countries. Used with
permission. LTE is a trademark of ETSI.
QSG Z079584508049
Alarm set
No signal
Signal strength
Airplane mode
Bluetooth on
Connected to a Wi-Fi®
network
Wi-Fi in use
Speaker on
Phone microphone o
GPS on
Notication Icons
Upcoming event
New Wi-Fi network detected
Downloading data
Sending data
USB connected
Updates available
Wired headset connected
Email
WARNING: This product contains a chemical known to the State of California to cause cancer,
birth defects or other reproductive harm.
Speaker
Volume
Up/Down
Key
Back
Camera
3.5 mm
Headset
Jack
Auxiliary
Microphone
External
Screen
Battery
Cover
Getting to Know Your Phone
Earpiece
Delete Key
Touch
Screen
Messaging Key
Main Microphone
Charging/
micro-USB Jack
Front Camera
Proximity &
Light Sensor
Customizable Key
Home Key
Power/End Key
Recent Apps Key
Send Key
Camera Key
Speaker Key
Back Key
4-way Navigation/
OK (center) Key
Song and artist
information
Add the song to your
favorites
PHONE &
FEATURE
GUIDE
Z079584508049
ZTEUSA.COM
Z353VL
TRULY
TIMELESS
Praat mee over dit product
Laat hier weten wat jij vindt van de ZTE Cymbal T LTE Mobiele telefoon. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.