Handleiding Black and Decker IR0175W Strijkijzer

Handleiding

Please Read and Save this Use and Care Book.

IMPORTANT SAFETY

INSTRUCTIONS

When using your iron, basic safety precautions should

always be followed, including the following:

❍ READ ALL INSTRUCTIONS BEFORE USING.

❍ Use iron only for its intended use.

❍ To protect against a risk of electric shock, do not immerse

the iron in water or other liquids.

❍ The iron should always be turned to the minimum (min)

setting before plugging or unplugging from outlet. Never

yank cord to disconnect from the outlet; instead grasp

plug and pull to disconnect.

❍ Do not allow cord to touch hot surfaces. Let iron cool

completely before putting away. Loop cord loosely around

iron when storing.

❍ Always disconnect iron from electrical outlet when filling

with water or emptying, and when not in use.

❍ Do not operate iron with a damaged cord, or if the iron

has been dropped or damaged. To avoid the risk of

electric shock, do not disassemble the iron; take it to a

qualified service person for examination and repair, or

call the appropriate toll-free number on the cover of this

manual. Incorrect reassembly can cause a risk of electric

shock when the iron is used.

❍ Close supervision is necessary for any appliance being

used by or near children. Do not leave iron unattended

while connected or on an ironing board.

❍ Burns can occur from touching hot metal parts, hot water

or steam. Use caution when you turn a steam iron upside

down or use the surge of steam—there may be hot water

in the reservoir. Avoid rapid movement of iron to minimize

hot water spillage.

❍

The iron must be used and rested on a stable surface.

- When placing the iron on its stand, ensure that the

surface on which the stand is placed is stable.

- The iron is not to be used if it has been dropped,

if there is visible signs of damage or if it is leaking.

SPECIAL INSTRUCTIONS

❍ To avoid a circuit overload, do not operate another high-

wattage appliance on the same circuit.

❍ If an extension cord is absolutely necessary, a 15-ampere

and 120-volt, or 7-ampere and 220-volt cord should be

used. Cords rated for less amperage may overheat. Care

should be taken to arrange the cord so that it cannot be

pulled or tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a

polarized outlet only one way. If the plug does not fit fully into the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician.

Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw

to prevent removal of the outer cover. To reduce the risk of fire or

electric shock, do not attempt to remove the outer cover. There are

no user-serviceable parts inside. Repair should be done only by

authorized service personnel.

Note: If the power supply cord is damaged, it should be replaced

by qualified personnel or in Latin America by an authorized service

center.

How to Use

This product is for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or

soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed

through a home softening system.

Important: For optimum performance, let the iron stand for 90

seconds before beginning to iron.

Tip: If unsure of a garment’s fiber, test a small area (on an inside

seam or hem) before ironing.

FILLING WATER TANK

1. Tilt the iron and using a clean measuring cup, pour water into

opening until the water reaches the MAX level mark on the water

tank. Do not overfill.

2. Plug iron into electrical outlet.

SPECIAL FEATURES

Automatic Shutoff in 3 Positions

• Your iron will automatically turn off after 30 seconds of inactivity

if left on its soleplate or on its side. If left vertically on its heel rest,

it will turn off after 8 minutes.

• The auto off light starts blinking red to let you know that the iron

hast stopped heating.

• Once you pick up the iron, the light will turn solid green again once

the set temperature is reached. If the iron is not fully heated, a solid

red light will appear; once the iron is ready, the light will turn solid

green.

Note: Wait for iron to reheat completely before resuming operation.

IRONING WITH STEAM

Steam is produced when you turn the fabric-select dial between

settings ●● and ●●●.

1. Plug the iron into electrical outlet.

2. Be sure there is water in the water tank.

3. Turn the fabric select dial to appropriate setting for your fabric

(between ●● and ●●●). Read garment’s label to help you

determine fabric type.

4. Set the steam/dry selector to desired steam setting.

5. When finished ironing, turn the steam/dry selector to and

unplug the iron.

Important: Always stand the iron on its heel rest when powered on

or not in use.

SPRAY

1. Be sure the iron is filled with water.

2. On first use, pump the spray button several times.

DRY IRONING

1. Turn the steam/dry selector to .

2. Turn the fabric-select dial to appropriate setting for your fabric.

3. Power indicator light comes on.

4. When finished ironing, make sure to unplug the iron.

Important: Always stand the iron on its heel rest when powered on

or not in use.

Care and Cleaning

This product contains no user serviceable parts. Refer service to

qualified service personnel.

CLEANING

1. Make sure iron is unplugged and has cooled completely. Wipe the

soleplate and outer surfaces with a soft cloth dampened with water

and mild household detergent. Never use abrasives, heavy-duty

cleansers, vinegar or scouring pads that may scratch or discolor

the iron.

2. After cleaning, steam iron over an old cloth to remove any residue

from the steam vents.

STORING YOUR IRON

1. Unplug the iron and let it cool completely.

2. Check that the fabric select dial is set to .

3. Store iron on its heel rest.

NEED HELP?

For service, repair or any questions regarding your appliance, call the

appropriate 800 number on cover of this book. Please DO NOT return the

product to the place of purchase. Also, please DO NOT mail product back to

manufacturer, nor bring it to a service center. You may also want to consult the

website listed on the cover of this manual.

TWO-YEAR LIMITED WARRANTY

(Applies only in the United States and Canada)

What does it cover?

• Any defect in material or workmanship provided; however, Applica’s liability

will not exceed the purchase price of product.

For how long?

• Two years from the date of original purchase with proof of such purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is either

new or factory refurbished.

How do you get service?

• Save your receipt as proof of date of sale.

• Visit the online service website at www.prodprotect.com/applica, or call

toll-free 1-800-231-9786, for general warranty service.

• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use

• Damage from misuse, abuse or neglect

• Products that have been modified in any way

• Products used or serviced outside the country of purchase

• Glass parts and other accessory items that are packed with the unit

• Shipping and handling costs associated with the replacement of the unit

• Consequential or incidental damages (Please note, however, that some

states do not allow the exclusion or limitation of consequential or incidental

damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

• This warranty gives you specific legal rights. You may also have other rights

that vary from state to state or province to province.

© 2011 Applica Consumer Products, Inc.

2011/5-17-120E/S

When using your iron for the first time, you may notice water

residue inside the unit. This is normal.

is a registered trademark of The Black & Decker

Corporation, Towson, Maryland, USA

Made and Printed in People’s Republic of China

Product may vary slightly from what is illustrated.

QUICK ‘N EASY

®

IRON

USA/Canada 1-800-231-9786

Accessories/Parts 1-800-738-0245

Register your product at www.prodprotect.com/applica

MODEL ❍ IR0175W

1. Spray nozzle

2. Water-fill opening

3. Steam/Dry selector

4. Spray button

5. Power indicator light

6. 180° pivoting cord

7. Heel rest

8. Fabric-select dial

9. Water tank

10. Soleplate





















Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Black and Decker IR0175W Strijkijzer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Black and Decker. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Black and Decker IR0175W Strijkijzer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Black and Decker Strijkijzers
Meer handleidingen voor Strijkijzers

Beoordeling

Veelgestelde vragen over Black and Decker IR0175W Strijkijzer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Black and Decker F920 Strijkijzer

Handleiding

Black and Decker ICR2040 Strijkijzer

Handleiding

Black and Decker IR2150 Strijkijzer

Handleiding

Black and Decker F611 Strijkijzer

Handleiding

Black and Decker ICR2030 Strijkijzer

Handleiding

Black and Decker D6000 Strijkijzer

Handleiding

Black and Decker ICR2020 Strijkijzer

Handleiding

Black and Decker IR1350S Strijkijzer

Gerelateerde categorieën