Handleiding Casio W-S220-1AVEF Sporthorloge

Handleiding

Operation Guide 3271

E-20

• A graphic animation plays on the display while a stopwatch timing operation is being

performed. You can toggle the animation on and off by holding down A while the

stopwatch is reset to all zeros.

More than 10 hours

• Whenever the elapsed time exceeds 10 hours, the measurement changes from

1/100-second units to 1-second units.

E-21

Recall Mode

Use the Recall Mode to recall and delete records stored

by the Stopwatch Mode.

• Stopwatch records are stored in “logs” that are created

automatically by the watch. See “Memory Management”

on page E-47 for more information.

• The title screen of the newest log appears first whenever

you enter the Recall Mode.

• Log numbers are automatically assigned in sequence,

starting from 01.

• All of the operations in this section are performed in the

Recall Mode, which you enter by pressing C (page E-9).

To recall stopwatch records

In the Recall Mode, use A to scroll through the log title

screens, starting from the newest one, as shown below.

When the title screen of the log you want is displayed, use

D (+) and B (–) to cycle through the records contained in

the log.

Log number

Creation date

(Month – Day)

Log Title Screen

Time measurement

was performed

E-22

D

Split time

Lap/Split number

BEST indicator

A

Log Title Screen

Stopwatch Record

Screen

Best Lap Time

Screen

Lap time

▲

▲

▲

▲

A

▲

▲

B

▲

D

B

D

B

▲

E-23

• The locations of the lap time and split time in the Stopwatch Record screen are

determined by the display format you last selected in the Stopwatch Mode (page

E-17).

• The BEST indicator identifies the record that contains the best lap time in the log.

• If a best lap time record is deleted automatically when the log becomes full, the

BEST indicator will not be transferred to the record with the next best lap time. See

“Memory Management” on page E-47 for more information about automatic deletion

of records.

To delete a log

1. In the Recall Mode, display the title screen or one of the records of the log you want

to delete.

2. While holding down B, hold down D for about two seconds until the watch beeps.

• “CLR” will flash on the display for two seconds and then the watch will beep.

Release B and D at this time.

• You cannot delete the log of an ongoing elapsed time measurement operation.

E-24

To delete all logs

1. While holding down B, hold down D for about five seconds until the watch beeps

once and then a second time.

• “CLR” will flash on the display for two seconds and then the watch will beep once.

Keep B and D depressed and “ALL” will flash on the display for three seconds,

and then the watch will beep again. This indicates that all log data is cleared.

• You cannot delete logs while an elapsed timing operation is in progress.

E-25

Countdown Timer

Dual timers can be set with two different starting times.

The watch can be configured so the two timers alternate,

so when one reaches the end of its countdown, the other

timer starts. You can specify a “number of repeats” value,

which controls how many times the two-timer countdown

operation is performed (1 = once, 2 = twice, etc.). The

starting time of each timer can be set in five-second steps

up to 99 minutes, 55 seconds.

You can specify up to 10 repeats. The watch emits a short

beep whenever either of the timers reaches the end of its

countdown during an ongoing timer operation. The watch

emits a 5-second beep when the end of the final timer

operation (specified by the number of repeats) is reached.

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero. The

beeper stops after about 5 seconds or when you press any button.

Seconds

Minutes Timer 1

Number of Repeats

E-26

To configure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the current

countdown start time starts to flash, which indicates the

setting screen.

• If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” (page

E-28) to display it.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Timer 1

Minutes

Timer 1

Seconds

Timer 2

Seconds

Timer 2

Minutes

Number of Repeats

E-27

• To disable either timer, set 00'00" as its countdown start time.

4. Press A to exit the setting screen.

Button Operation

Use D (+) and B (–) to change the setting.

Use D (+) and B (–) to change the setting.

Setting

Minutes, Seconds

Number of Repeats

Screen

3. When the setting you want to change is flashing, use D and B to change it as

described below.

E-28

To use the countdown timer

Press D while in the Countdown Timer Mode to start the countdown timer.

• The countdown is performed by alternating between Timer 1 and Timer 2. A short

beep is emitted to signal a changeover from one timer to the other.

• Press D to pause a countdown. Press D again to resume.

• Pressing B while a countdown timer is stopped resets it to the start time specified

by you.

• The watch emits a 5-second beep when the end of the final timer operation

(specified by the number of repeats) is reached.

• Even if you exit the Countdown Timer Mode, the countdown timer operation

continues and the watch beeps as required.

Current timer time

Preset number of repeatsCurrent repeat count

Current time

Timer 1 or 2

(Reset)

(Start/Stop)

E-29

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

• The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check to make sure you

have the correct city selected as your Home City. Also

check to make sure that the current time as shown in

the Timekeeping Mode is correct.

• Select a city code in the World Time Mode to display the

current time in any particular time zone around the

globe. See the “City Code Table” at the back of this

manual for information about the UTC differential

settings that are supported.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C

(page E-9).

Current time in

selected city

City code

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio W-S220-1AVEF Sporthorloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio W-S220-1AVEF Sporthorloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Sporthorloges
Meer handleidingen voor Sporthorloges

Veelgestelde vragen over Casio W-S220-1AVEF Sporthorloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio W-734-2AVEF Sporthorloge

Handleiding

Casio W-752-1AVES Sporthorloge

Handleiding

Casio STL-S300H-1AEF Sporthorloge

Handleiding

Casio STL-S300H-1BEF Sporthorloge

Handleiding

Casio W-734-1AVEF Sporthorloge

Handleiding

Casio W-752D-1AVES Sporthorloge

Handleiding

Medion LIFE S2400 (MD 61759) Sporthorloge

Handleiding

Garmin Approach S3 Sporthorloge

Gerelateerde categorieën