Handleiding Conrad Streifen I Papiervernietiger

Handleiding

Document Shredder Strips I

Version 12/12

Item no. 77 71 28

1. Intended use

This product is designed for shredding paper and credit cards. Do not shred different material. It is intended for

indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under all

circumstances.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product for

purposes other than those described above, the product may be damaged. In addition, improper use can cause

hazardssuchasshortcircuiting,re,electricshocketc.Readtheinstructionscarefullyandkeepthem.Makethis

product available to third parties only together with its operating instructions.

2. Content of delivery

• Shredder

• Operating instructions

3. Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you

do not follow the safety instructions and information on proper handling in this manual, we

assume no liability for any resulting personal injury or damage to property. Such cases will

invalidate the warranty/guarantee.

Persons / Product

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may become dangerous playing material for

children.

• Protecttheproductfromextremetemperatures,directsunlight,strongjolts,highhumidity,moisture,ammable

gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental

use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

• Do not reach into the feeder slot.

• Do not insert paper pin, staples or any other metal parts into the feeder slot.

• Keep long hair away from around the feeder slot.

• Keep ties, scarves, loose clothing and long necklaces or bracelets away from the feeder slot.

• Unplug the mains plug from the mains outlet before cleaning the product or storing it for a longer period.

• Do not operate the device for longer than 120 seconds to avoid overheating the motor.

• The product should not be connected immediately after it has been brought from an area of cold temperature

to an area of warm temperature. Condensed water might destroy the product. Wait until the product stabilising

to adapt to the new ambient temperature before use.

• The mains outlet must be located near to the device and be easily accessible.

• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket using

the intended grips.

• Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.

• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechanical

stress. Avoid excessive thermal stress on the mains cable from extreme heat or cold. Do not modify the mains

cable. Otherwise the mains cable may be damaged. A damaged mains cable can cause a deadly electric shock.

• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via the

respective circuit breaker) and then carefully pull the mains plug from the mains socket. Never use the product

if the mains cable is damaged.

• A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the

manufacturerorasimilarlyqualiedperson,soastopreventanydanger.

• Never plug in or unplug the mains plug when your hands are wet.

Miscellaneous

• Consult an expert when in doubt about operation, safety or connection of the device.

• Maintenance,modicationsandrepairsaretobeperformedexclusivelybyanexpertorataqualiedshop.

• If you have questions which remain unanswered by these operating instructions, contact our technical support

service or other technical personnel.

4. Operating elements

1 Selector switch

2 Credit card insertion slot

3 Paper insertion slot

4 Collection container

5. Initial operation

1. Place the shredder on a level surface.

2. Plug the mains plug into a mains socket.

Shredding paper

Do not insert more than 6 sheets of paper (size DIN A4 with a maximum grammage of

75 g/m

2

) into the insertion slot.

Do not shred adhesive notes or paper with remains of adhesive.

1. Slide the selector switch to the right into the “AUTO” position.

2. Now, carefully insert the paper into the insertion slot. The paper will automatically be fed in and shredded.

3. Whennished,slidetheselectorswitchintothe“OFF”position.

Shredding credit cards

Shred only one credit card at a time.

1. Slide the selector switch to the right into the “AUTO” position.

2. Carefully insert a single credit card into the credit card insertion slot (2). The credit card will be fed in and

shredded.

3. Whennished,slidetheselectorswitchintothe“OFF”position.

Clearing paper jams

1. Slide the selector switch to the “REV” position.

2. The cutting unit will now run in the reverse direction and push the jammed paper out again.

3. Whennished,slidetheselectorswitchintothe“OFF”position.

6. Troubleshooting

Problem Cause Solution

The cutting unit continuously keeps

on running in the “AUTO” position.

The paper container is full and the

paper from the cutting unit cannot

feed through.

Unplug the mains plug and empty

the container.

After shredding, there are still

pieces of paper remaining in the

cutting unit.

The remaining pieces of paper are

stuck between blades.

Slide the selector switch into the

“REV” position.

The automatic feed stops, however

there is still paper in the insertion

slot.

The paper was inserted into the

insertion slot at an angle.

Ensure the paper is straight as it

goes into the insertion slot.

The paper is too soft, thin, damp or

creased.

Fold,dryorattenthepaper.

The device does not work, although

no pieces of paper remain in the

feeder.

The motor is overheated.

Leave the device to cool down

before putting it into operation

again.

7. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste.

At the end of its service life, dispose of the product according to the relevant statutory regulations.

8. Technical data

Operating voltage: 220 – 240 V/AC, 50 Hz Operating temperature: -10 to +85 ºC

Max. power consumption: 0.9 A Blade clearance: 7 mm (paper)

7 mm (credit card)

Safety level: 1 (acc. to DIN 32757) Insertion slot width: 220 mm (paper)

54 mm (credit card)

Noise level: <72 dB Dimensions (W x H x D): 277 x 255 x 110 mm

Shredding speed: 2.5 m/min Weight: 1.3 kg

Container volume: 11 l

These operating instructions are published by Conrad Electronic SE,

Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.

All rights including translation reserved. Reproduction by any method, e.g. photocopy,

microlming,orthecaptureinelectronicdataprocessingsystemsrequiretheprior

written approval by the editor. Reprinting, also in part, is prohibited.

Theoperatinginstructionsreectthecurrenttechnicalspecicationsattimeofprint.

Wereservetherighttochangethetechnicalorphysicalspecications.

© 2012 by Conrad Electronic SE.

V3_1212_02-JH

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Conrad Streifen I Papiervernietiger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Conrad. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Conrad Streifen I Papiervernietiger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Conrad Papiervernietigers
Meer handleidingen voor Papiervernietigers

Veelgestelde vragen over Conrad Streifen I Papiervernietiger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Conrad IPS018.s Papiervernietiger

Handleiding

Conrad IPS050D Papiervernietiger

Handleiding

Conrad IPS080D Papiervernietiger

Handleiding

Conrad Partikelschnitt Papiervernietiger

Handleiding

Conrad IPS120M Papiervernietiger

Handleiding

Rexel Optimum AutoFeed+ 150X Papiervernietiger

Handleiding

Olympia CC 415.4 Papiervernietiger

Handleiding

United Office IAN 416749 Papiervernietiger

Gerelateerde categorieën