Home > Huis & Inrichting > Thermostaten > Horstmann Thermostaten > Horstmann ChannelPlus H27ZXL Thermostaat

Handleiding Horstmann ChannelPlus H27ZXL Thermostaat

Name: Horstmann ChannelPlus H27ZXL Thermostaat
Brand: Horstmann
SKU: ChannelPlus H27ZXL
Rating: 0 (1 reviews)

Handleiding voor je Horstmann ChannelPlus H27ZXL Thermostaat nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 2 veelgestelde vragen, 1 comment en heeft 1 stem met een gemiddelde score van 0/100. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

The simple instructions below are designed to help with the programming of the unit. All the following

instructions require the front flap to be lowered. Please replace the flap when

normal operation is required.

Electronic equipment can in some circumstances be affected by electrical interference. If the

programmer’s display becomes frozen or scrambled; or if you wish to revert back to the default time

settings please use the following procedure.

FRONT COVER

SETTING DAY AND TIME OF DAY

Should you encounter any problems, please refer to the

Question and Answer section located on page 4.

The normal working position for the SET switch is in the PROG.RUN position. In order to remind the user

of this, the flap is unable to be closed with the switch in any other position.

RESETTING THE PROGRAMMER

Press SELECT once.

Programme goes from

AUTO to ALL DAY

Press SELECT again.

Programme goes from

ALL DAY to ON

Press SELECT again.

Programme goes from

ON to OFF

Press SELECT again.

Programme goes from

OFFto AUTO

Zone will operate from

first ON until last OFF

period

Zone will be

continuously ON

Zone will be

continuously OFF

Programmer will return

to normal ON and OFF

times

BOOST FUNCTION- 1 or 2 hour temporary override

Press BOOST button

once for 1 hour of

Zone 1 or Zone 2

Press BOOST button

twice for 2 hours of

Zone 1 or Zone 2

At any time during a BOOST

period press BOOST again to

return to normal programming

ADVANCE FUNCTION- Brings forward next on or off operation

Press ADVANCE button once

to move to the next

ON/OFF time

To cancel the advance press the ADVANCE

button again. This will return the unit to

its normal programme

HOLIDAY FUNCTION - Allows system to be programmed for up to 32 days

Move SET switch to the

HOLIDAY position

Use the PLUS button to enter the

required number of nights

(MAX OF32NIGHTS)

Return SET switch to the

PROG.RUN position

Whilst the HOLIDAY FUNCTION is in operation the system will remain OFF, the display will show the

number of nights remaining. The HOLIDAY setting is an instant function and cannot be set in advance.

The HOLIDAY FUNCTION can be cancelled at any time by pressing any of the SELECT buttons. Normal

programme functions will resume at the first ON period after the pre-set number of nights has expired.

INFORMATION AND ADVICE

Programming ON/OFF times

If a Zone 1 or Zone 2 period is not required it can be cancelled by setting the ON and OFF

settings to the same time. Example ON 10:00am OFF 10:00am

Your programmer will prevent you from accidentally overlapping ON and OFF times.

Example: If the 2nd ON time is set at 12:00pm and then you try and set the 1st OFF at 12:30 pm the

OFF setting will ‘bounce’ by a 10 minute period until the 2nd ON time has been adjusted.

SETTING

ADVANCE

SELECT

Lower the front flap of the unit. On Zone 2 press the ADVANCE and

SELECT buttons together then release the buttons and the programmer

will return to the preset factory settings.

Page 2

BOOST

Page 3

Move the SET

switch to the CLOCK

position.

Use PLUS and

MINUS buttons to

adjust time

Return SET switch to

PROG.RUN position

Use PLUS and

MINUS buttons to

adjust day

Press

ENTER

Move SET switch to

Zone 1 or Zone 2

position

Repeat this

process for 2nd

and 3rd settings

Return SET

switch to PROG.RUN

position.

Press

ENTER

Press

ENTER

Press

ENTER

SETTING THE ON AND OFF TIMES

The SET slide switch must be in the PROG.RUN position for the following instructions.

The following actions work independently on either Zone 1 or Zone 2.

SPECIAL FEATURES

SETTING

SET

TUE

MON

12:OOPM

1:45PM

SETTING1ST

ON OFF

6:30AM 8:30AM

SUN

Use PLUS

and MINUS

buttons to

adjust day

Use PLUS and

MINUS

buttons to adjust

the 1st ON time.

Use the PLUS

and MINUS

buttons to adjust

the 1st OFF time.

Programme the

remaining days.

If you require this

programme on any other

day of the week use the

PLUS and MINUS buttons to

select day and press COPY

ALL DAY

ON UNTIL

8:30

OFF

SUN

10:00AM

SUN

AUTO

ON UNTIL