Handleiding JBL Arena Sub 100P Subwoofer

Handleiding

2

SUBWOOFER REAR-PANEL CONTROLS AND CONNECTION

1) Power Mode:

When switched to 'Auto' position, the subwoofer will then be in Standby

mode. It will automatically turn on when an audio signal is detected and

will return to the Standby mode when no audio signal is detected after

approximately 10 minutes. Setting this switch to ‘On’ keeps the

subwoofer powered until Power Switch is turned 'Off.'

2) On/Standby LED:

When the Power Switch is in the ‘On’ position, this LED indicates whether

the subwoofer is in the On or Standby state.

• When the LED glows blue, the subwoofer is turned On.

• When the LED glows red, the subwoofer is in the Standby mode.

3) Phase Switch:

This switch determines whether the subwoofer transducer's piston-like

action moves in and out in phase with the main speakers. If the

subwoofer were to play out of phase with the main speakers, the sound

waves from the main speakers could partially cancel out the sound waves

from the subwoofer, reducing bass performance and sonic impact. This

phenomenon depends in part on the placement of all the speakers relative

to the listening position and to each other in the room.

4) Crossover Control:

This control determines the highest frequency at which the subwoofer

reproduces sounds. The higher you set the Crossover control, the higher

in frequency the subwoofer will operate and the more its bass will

“overlap” that of the speakers. This adjustment helps achieve a smooth

transition of bass frequencies between the subwoofer and the speakers

for a variety of different rooms and subwoofer locations.

5) Volume:

Use this control to adjust the subwoofer’s volume. Turn the knob

clockwise to increase the volume; turn the knob counterclock-wise to

decrease the volume.

6) Subwoofer (LFE Input):

Connect the subwoofer to the dedicated subwoofer / LFE output of a

receiver/processor.

7) Power Switch:

Set this switch in the ‘On’ position to turn the subwoofer on. If you will be

away from home, or will not be using the subwoofer for an extended

period, set this switch in the ‘Off’ position to conserve energy.

8) Power Input:

After you have made and verified the subwoofer’s input connection, plug

the power cord into an active, unswitched electrical outlet for proper

operation of the subwoofer.

DO NOT plug the power cord into the accessory outlets found on some

audio components.

SUB 100P

POWER

MODE

ON

PHASE

NORMAL

AUTO REVERSE

PWR

BLUE: ON

RED: STANDBY

CROSSOVER

50Hz 150Hz

MIN

MAX

VOLUME

SUBWOOFER

INPUT

POWER

ON

OFF

POWER

INPUT

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je JBL Arena Sub 100P Subwoofer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met JBL. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van JBL Arena Sub 100P Subwoofer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor JBL Subwoofers
Meer handleidingen voor Subwoofers

Beoordeling

Gerelateerde producten

Handleiding

ELAC RS700 Varro Subwoofer

Handleiding

Samsung SWA-W510 Subwoofer

Handleiding

Curtis MSB3787W Subwoofer

Handleiding

Scandyna Minibass Subwoofer

Handleiding

Polk Audio DSW MicroPRO 2000 Subwoofer

Handleiding

Hisense VW6 Subwoofer

Handleiding

Pioneer S-21W Subwoofer

Handleiding

Dali Sub K-14 F Subwoofer

Gerelateerde categorieën