Handleiding Lorus Z021 Uurwerk

Handleiding

S3

■

CHARACTERISTICS

1. Analogue & digital time displays: Hour,

Minute, Second, Month, Date and Day of the

week.

2. Daily alarm and hourly chime: The alarm

can be set to sound at the designated time

on a 24-hour basis and the chime can be set

to sound every hour on the hour with a single

beep.

3. Stopwatch: The stopwatch can measure

up to 23 hours 59 minutes and 59 seconds

in 1/100-second increments. Split time

measurement is available.

4. Selection of 12 or 24-hour format: The time

display format in either 12-hour indication or

24-hour indication can be selected.

5. EL backlight: The built-in electro-luminescent

(EL) backlight illuminates the display for easy

viewing in darkness.

■

DISPLAY AND BUTTON FUNCTION

■

HOW TO SET TIME/CALENDAR

■

HOW TO SET ALARM TIME

■

HOW TO CHANGE THE DISPLAY

MODE

■

SETTING THE TIME (ANALOGUE)

1. Pull the crown out one step, the second hand

will stop.

2. Set the correct time by turning the crown.

3. Push the crown back to the original position.

The watch will start running again.

* The analogue indication and digital display of

the time setting can be adjusted separately.

STOPWATCH mode

1. From NORMAL TIME mode,

press S3 button

twice to enter the ALARM mode.

2. Press S2 button to begin setting procedure.

The hours digit starts flashing.

3. Press S1 button to set HOURS setting.

4. Press S2 button to move on to MINUTES setting.

Press S1 button to set MINUTES setting.

5. Press S2 button to confirm the settings.

6. Press S3 button to return to NORMAL TIME

mode.

*

Press S3 button to show the

NORMAL TIME

mode.

* If the NORMAL TIME mode is shown already on

the display, skip the above operation.

* Press S3 button to change the display mode in

the following order.

NREZ021

3-2013

CAL. Z021 (RW6 SERIES)

1.

From NORMAL TIME mode, p

ress S3 button

three times to begin setting procedure.

The second digits start flashing.

2. Press S1 button to reset the second digits to

zero.

* If S1 button is pressed when the second digits

are in a range between 30 and 59, the second

digits will be reset to 00 and one minute will be

added. If S1 button is pressed when the second

digits are in a range between 00 and 29, the

second digits will be reset to 00 and the minute

digits will be unchanged.

3. Press S2 button to move on to HOURS setting.

* Selection of the digits to be adjusted is made in

the following order by pressing S2 button. Press

S1 button to adjust the value.

* When setting HOURS, “H” stands for 24-hour

format, “A” or “P” stands for 12-hour format.

4. Press S3 button after completing the setting.

CROWN

NORMAL TIME mode

S3

ALARM mode

S3

S3

S2

HOURS SETTING BY

PRESSING S1

MINUTES SETTING BY

PRESSING S1

S2

NORMAL TIME

MINUTES SETTING BY

PRESSING S1

HOURS SETTING BY

PRESSING S1

SECONDS SETTING

BY PRESSING S1

PRESS

S3

3 times

S2

S2

MONTH SETTING BY

PRESSING S1

DATE SETTING BY

PRESSING S1

S3

SECONDS

DATE

DAY OF

THE WEEK

MONTH

MINUTESHOURS

S2

S2

S2

S2

S2

12/24H-

FORMAT

S2

TIME SETTING mode

ALARM modeNORMAL TIME mode

S2

DAY OF WEEK SETTING

BY PRESSING S1

S2

S3

S4 (LIGHT)

HOURS

DAY OF WEEK

CHIME

DATE

MINUTES

SECONDS

ALARM

S3 (MODE)

S2 (RESET)

MONTH

S1(START/STOP)

S2

S2

PRESS

S3

twice

S2

for confirmation

Engagement/Disengagement of ALARM &

CHIME

* In the ALARM setting mode, with each press

of S1 button, the ALARM and CHIME can be

engaged or disengaged in the following order.

The ALARM signal and/or CHIME signal appear

or disappear on the display accordingly.

S1

S1

S3

NORMAL TIME

S1

ALARM ON

CHIME ON

ALARM/CHIME ON

S1

ALARM MODE

How to stop the alarm sound

Press S3 to turn the snooze function on or off

alternately. When the snooze function is enabled,

the alarm will stop sounding temporarily and

go off again 5 minutes later for 20 seconds and

automatically stop.

Press S1 or S2 to stop the alarm while it is sounding.

Snooze function

PRESS

S3

twice

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Lorus Z021 Uurwerk. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Lorus. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Lorus Z021 Uurwerk in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Lorus Uurwerken
Meer handleidingen voor Uurwerken

Veelgestelde vragen over Lorus Z021 Uurwerk

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Lorus Y676 Uurwerk

Handleiding

Lorus VX82 Uurwerk

Handleiding

Lorus Z010 Uurwerk

Handleiding

Lorus Y719 Uurwerk

Handleiding

Lorus W820 Uurwerk

Handleiding

Lorus YK35 Uurwerk

Handleiding

Lorus YK60 Uurwerk

Handleiding

Lorus Z012 Uurwerk

Gerelateerde categorieën