Handleiding Nitecore SRT3 Defender Zaklamp

Handleiding

产品特性

·为执法，自卫，户外应用特别设计

·世界首创第三代控制环技术

·可通过控制环快速选择所需的亮度和功能

·采用CREE第二代XM-L（XM-L2 U2）LED发光体

·最高550流明超强亮度输出

·采用第二代反光杯电镀技术（晶亮电镀），结合PDOT数字精确优化技术制造的最优化光学系统，

最大光强4500cd，射程高达134米

·长达200小时的最长续航时间

·自带红蓝双色照明/信号灯功能

·0.1-550流明连续亮度调节功能

·6种特殊功能可选

·电池反接保护功能

·配备不锈钢镀钛夹子

·头部不锈钢保护环，保护电筒核心原件不受损坏

·双面镀膜防刮光学镜片

·航太级铝合金制造

·耐磨的军规三级硬化表面处理

·符合IPX8防水标准（水下2米）

·1.5米防摔能力

·尾部倒立功能

体积

长度： 100mm

装上AA加长筒长度：117mm

头部直径： 25.4mm

尾部直径： 24.3mm

重量： 73克（不含电池）

使用AA加长筒重量：87克（不含电池）

选用电池

使用AA加长筒：

亮度&时间

调节电筒亮度及功能

当电筒开启时，旋转靠近电筒头部的控制环，电筒即会改变亮度及功能。

当控制环从逆时针最左边开始往右顺时针转动时，电筒亮度功能将依次按照“信标-SOS功能-警示

红蓝闪烁-蓝光-红光-超低亮-无段调光-超高亮-暴闪”改变；当控制环逆向转动时，亮度功能随之

逆向改变。

在无段调光状态下，当亮度减少时，电筒的连续使用时间增加。

保养电筒

请每半年使用软布清洁电筒的螺牙，并使用硅润滑油润滑螺牙。

使用AA加长筒

本电筒可以使用AA加长筒，如图安装后，可以使用AA电池作为电筒电源。

保固

NITECORE®产品拥有售后保固服务。在购买本产品的15天内，如果有任何质量问题均可向经销商

要求免费更换。在购买本产品的5年内享受免费保固服务。在超过5年免费保固期后，本产品享有终

身有限度保固服务，如需要更换重要部件则需收取成本费用。

本保固规则不适用于以下情况：

1. 人为破坏，拆解，改装本产品。

2. 错误操作导致产品损坏(如装反电池等)。

3. 电池漏液导致产品损坏。

需要NITECORE®的保固服务，请联系当地的代理商或发邮件到[email protected]

※ 本说明书的所有图片、陈述及文字信息仅供参考，请以官网www.nitecore.cn实际信息

为准。思迈工贸有限公司拥有对说明书内容的最终解释权和修改权。

注：以上数据按照国际手电筒测量标准ANSI/NEMA FL1所述之测量方法，所使用电池为： RCR123

锂电池（3.7V 650mAh）, CR123（3V 约1550mAh）, AA ( 1.2V, 2500mAh )分别测量，不同电池

或使用环境可能会对以上数据产生影响。

*超低亮到超高亮为无段调光，用户可以随心选择适合的亮度，而使用电筒的续航时间也相应自由控

制。

使用电筒

装入电池

请按示意图装入1节CR123电池：（如图）

战术点亮

轻按尾部开关，电筒会开启，松手电筒熄灭。

开启/关闭

开启手电筒：按下手电筒尾部按钮开关，直到有“嗒”的一声后松手，手电筒开启。

关闭手电筒：再次按下尾部按钮开关，直到有“嗒”的一声后松手，手电筒关闭。

User Manual

Features

· Purpose-designed for law enforcement, self-defense and outdoor applications.

· The world’s first line of flashlights to feature third generation SSR (smart selector ring)

technology

· Smoothly and rapidly select brightness levels and function by rotating a smart selector ring

· Utilizes the latest CREE XM-L (XM-L2 U2) LED for a maximum output of up to 550 lumens

· Second generation of ‘Crystal Coating Technology’ along with ‘Precision Digital Optics

Technology’ provide extreme reflector performance

· Boasts a peak beam intensity of 4,500cd and a throw distance of up to 134 meters (ANSI

FL1)

· High efficiency circuit board provides up to 200 hours runtime on lowest output level

· Equipped with unique multi-colored (red and blue) tactical / signaling lights

· Infinite brightness adjustment from 0.1 to 550 lumens

· Six rapidly switchable functions to select from

· Reverse polarity protection

· Stainless steel titanium-plated clip

· Stainless steel retaining ring protects core components from damage

· Toughened ultra-clear mineral glass with anti-reflective coating

· Constructed from aero grade aluminum alloy

· Robust HAIII military grade hard-anodized

· Waterproof in accordance with IPX8 (two meters submersible)

· Impact resistant to 1.5 meters

· Tail stand capability

Dimensions

Length: 100mm (3.9”)

117mm (4.6”)(with AA extension tube)

Head diameter: 25.4mm (1”)

Tube diameter: 24.3mm (0.96”)

Weight: 73g (2.57oz)(without battery)

87g (3.07oz, without battery)(with AA extension tube)

Accessories

Quality holster, removable clip, AA extension tube, lanyard, spare tail cap button and spare

O-ring

Battery Options

Output & Runtime

NOTICE: The above data has been measured in accordance with the international flashlight

testing standards ANSI/NEMA FL1 using one x 3.7V 650mAh Nitecore RCR123 battery, one x

3V 1550mAh Nitecore CR123 battery and one x 1.2V 2500mAh AA battery under laboratory

conditions. The data may vary slightly during real-world use due to battery type, individual

usage habits and environmental factors.

*

Infinite brightness adjustment varies from 0.1 to 550 lumens and is manually adjusted by

rotation of the Smart Selector Ring. Subsequently, runtimes will vary anywhere from 45 minutes

to 150 hours depending on chosen level of output.

Battery Installation

Insert one (R)CR123 battery with the positive pole pointing forward (toward the light head).

Switching ON/OFF

To switch ON: Press the button on the tailcap until a “click” is heard.

To switch OFF: Press the button on the tailcap a second time until a “click” is heard.

Momentary Illumination

Momentary illumination can be achieved by switching the flashlight off and then half pressing

and holding the tail switch. Release switch to turn the light off.

Adjusting Output

With the light turned on, slowly rotate the Smart Selector Ring (adjacent to the bezel) in a

counter-clockwise direction to cycle through the following brightness levels: beacon -> SOS ->

police warning signal -> blue mode -> red mode -> lower mode -> infinite brightness modes ->

turbo mode -> strobe mode. These modes may be cycled through in reverse by rotating the

Smart Selector Ring in a clockwise direction.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.

Using AA extension tube

The SRT3 can utilize one AA extension tube. Please

follow the diagram toassemble the body, and you can

use one AA battery to power the light.

Warranty Details

Our authorized dealers and distributors are responsible for warranty service. Should any problem

covered under warranty occurs, customers can contact their dealers or distributors in regards to their

warranty claims, as long as the product was purchased from an authorized dealer or distributor.

NITECORE’s Warranty is provided only for products purchased from an authorized source. This

applies to all NITECORE products.

Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer

within the 15 days of purchase. After 15 days, all defective / malfunctioning NITECORE® products

can be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond

60 months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not

the cost of accessories or replacement parts.

The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified by

unauthorized parties, or damaged by batteries leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE®

distributor or send an email to [email protected].

※All images, text and statements specified herein this user manual are for reference purpose only.

Should any discrepancy occurs between this manual and information specified on www.nitecore.com.

Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of this document at

any time without prior notice.

Thanks for purchasing NITECORE!

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: [email protected]

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road, Guangzhou,

China 510600

®

ALL-ROUND Flashlight Expert

NOTE:

1. Ensure batteries are inserted with the

positive (+) end pointing to the head.

The SRT3 will not operate with

incorrectly inserted batteries.

2. Ensure when turning the SRT3 on, the

beam is directed away from the eyes of

people or animals.

Note: When using the SRT3 in infinite

brightness mode, runtime will increase

when lower levels of output are

selected. For user safety and to prevent

overheating / failure, the SRT3 will

automatically switch to high mode after

three minutes of use in Turbo mode.

Slowly rotate the Smart Selector Ring

or press the tail switch again to

reactivate turbo mode when needed.

TYPE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

Y (Recommended)

Rechargeable Lithium battery

RCR123 3.7V

TYPE

Nominal voltage

Compatible

Primary AA battery

AA 1.5V

Y (Recommended)

Rechargeable AA battery

AA 1.2V

Y (Recommended)

Primary AA Lithium battery

L91 1.5V

Y

Primary LiFePO4 battery

14500 3.2V

Y

Rechargeable Li-ion battery

14500 3.7V

Y (Recommended)

With AA extension tube:

550*

LUMENS

4500cd

(Peak Beam Intensity)

2800cd

(Peak Beam Intensity)

1550cd

(Peak Beam Intensity)

134

m

(Beam Distance)

IPX8, 2

m

(Waterproof AND Submersible)

1.5

m

(Impact Resistant)

105

m

(Beam Distance)

79

m

(Beam Distance)

0.1*

LUMENS

330*

LUMENS

0.1*

LUMENS

180*

LUMENS

0.1*

LUMENS

TURBO LOWER TURBO LOWER

150

h

45

min

1

h

15

min

200

h

200

h

1

h

TURBO LOWER

1

×NL166(RCR123) 1×CR123 1×AA

AA extension tube

20161220

Please find us on facebook:

Nitecore Flashlight

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore SRT3 Defender Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore SRT3 Defender Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Beoordeling

Veelgestelde vragen over Nitecore SRT3 Defender Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Nitecore P20i UV Zaklamp

Handleiding

Nitecore NE02 Zaklamp

Handleiding

Nitecore NU33 Zaklamp

Handleiding

Nitecore UT32 Zaklamp

Handleiding

Nitecore TINI Cu Zaklamp

Handleiding

Nitecore TM20K Zaklamp

Handleiding

Nitecore NU35 Zaklamp

Handleiding

Nitecore P30i Zaklamp

Gerelateerde categorieën