Home > Fietsen & Brommers > Fietslampen > NiteRider Fietslampen > NiteRider MiNewt 600 Cordless Fietslamp

Handleiding NiteRider MiNewt 600 Cordless Fietslamp

Handleiding voor je NiteRider MiNewt 600 Cordless Fietslamp nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

SUPPORT

If you experience difculties during product installation or

operation, NiteRider provides free telephone support on weekdays

from 8:00 AM to 4:30 PM (Pacic Time) at 800.466.8366, ext 4.

You may also e-mail us at support@niterider.com.

WARRANTY

NiteRider stands behind its products with the following MiNewt

Cordless warranties:

•Lifetime warranty on all mechanical components

•2 years on electrical components

•180 days on rechargeable batteries

To obtain warranty service, it is preferable to have your

original sales receipt. Contact the NiteRider customer

service department at 800.466.8366, ext 4 to obtain a Return

Merchandise Authorization (RMA) number. The RMA number

must be prominently displayed on the outside of your package.

The product must be properly packaged to prevent damage

in transit. For complete warranty information, please visit our

website at www.niterider.com.

The MiNewt.350 Cordless will run up to:

The MiNewt.600 Cordless will run up to:

RUN TIMES

Light Level

High

Med

Low

Walk

High

Med

Low

Walk

Time*

1:30

3:00

4:30

30:00

1:30

3:00

4:30

30:00

Lumens

350

225

150

600

400

275

*Run times are aproximations and will vary.

NiteRider Technical Lighting Systems, Inc.

8295 Aero Place, Suite 200

San Diego, CA 92123

www.niterider.com

OPERATION

1. The MiNewt Cordless headlamp is shipped in lock mode. In order to

use the headlamp it must be unlocked. To unlock the headlamp,

press and hold the power button for several seconds until the power

button turns, or ashes green. Release the power button.

2. The light has 5 modes - low, medium and high beam - daylight ash

mode and walk mode. Press and release the headlamp

power button to turn the light on. Cycle through the three brightness

levels by pressing and releasing the power button.

3. To access the daylight visible ash mode and walk mode, press and

hold the power button for greater than 3 seconds or until the

headlamp begins to ash.

4. With the headlamp in ash mode, press and release the power button to

access walk mode. From walk mode you can return to normal mode by

pressing and releasing the power button.

5. To turn the light off from either normal, ash, or walk mode, press and

hold the power button until the light turns off.

6. It is highly recommended that the light be put in lock mode during

transport of the headlamp in order to prevent accidentally turning on of

the headlamp. To put the headlamp in lock mode, press and hold the

power button for several seconds until the headlamp turns off and the

power button turns or ashes red.

LOW BATTERY INDICATOR

With approximately 15% battery capacity remaining, the indicator

light on the headlamp will turn from green to red.

RESERVE MODE

Reserve Mode will automatically shift your light to low beam when the

battery is very low and about to cut off. Once reserve mode starts you will

only be able to use Low Beam, Flash Mode and Walking Mode. High Beam

and Medium Beam will be disabled.

BATTERY CHARGING

1. Plug the AC Power Adapter into an electric outlet, then plug the USB

Cable from the AC Power Adapter into the rear of the head lamp. The

headlamp may also be charged from the USB outlet on a computer by

plugging the USB Cable directly from the computer to the headlamp.

2. The indicator light will be red until the Li-Ion battery is fully charged;

then it changes to green.

3. Unplug the AC Adapter from the headlamp and wall socket, grasping

the connectors rather than the cable.

4. Leaving the headlamp and AC Adapter connected indenitely will not

harm the batteries.

5. When storing for an extended period of time, charge the battery every

four weeks to maximize battery life.

MOUNTING THE HEADLAMP

Depending on the size of your bike’s handlebars, you may or

may not use the extra shim included with your MiNewt Cordless.

1. Remove the handlebar mount from the headlamp.

2. Open the mount and place on the handlebar.

3. Tightly squeeze the mount making sure it is securely mounted.

4. Once the handlebar mount is securely mounted, slide the

headlamp into place. There will be an audible “click” when the

headlamp is fully engaged with the handlebar mount.

5. Aim the headlamp by swiveling the headlamp back and forth.

Squeeze Here

Beoordeling

Laat ons weten wat je van de NiteRider MiNewt 600 Cordless Fietslamp vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de NiteRider MiNewt 600 Cordless Fietslamp?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de NiteRider MiNewt 600 Cordless Fietslamp. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je NiteRider MiNewt 600 Cordless Fietslamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met NiteRider. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van NiteRider MiNewt 600 Cordless Fietslamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.