150-23226_ Rev A
Pro 1800 Race &
Pro 1200 Race
User Guide
BATTERY CHARGING AND CARE
1. Plug the AC Adapter into an electric outlet,
then plug the cable from the AC Adapter into
the battery.
2. The LED indicator on the battery will turn red while
the battery is charging. When the battery is fully
charged, the LED will turn blue.
3. Unplug the AC Adapter from the battery by
grasping the connectors rather than the cable.
4. Leaving the battery and AC Adapter connected
indenitely will not harm the battery or AC Adapter.
5. When storing for an extended period of time, charge
the battery every three months to maximize its
lifespan.
RIDING AT NIGHT
While the Pro 1200 and 1800 Race lighting systems
will improve your view, control and enjoyment of night
riding,
please remember that cycling at night is an inherently
dangerous activity. In addition to using your lighting
system properly and riding with extreme caution,
NiteRider urges you to:
• Never ride alone
• Always let someone know where you are going
• Wear a helmet and reective clothing
• Carry an auxiliary light and emergency
supplies
• Make sure the headlamp, mounting bracket
and battery are securely fastened
• Always disconnect the battery from the
headlamp when transporting the light system
PROTECTING YOUR INVESTMENT
Properly charge your battery to maximize its lifespan
(see the “Battery Charging and Care” section for detailed
information). The Pro 1200 and 1800 Race will perform
in wet weather conditions, but submerging it in water will
damage the system.
SUPPORT
If you experience difculties during product installation or
operation, NiteRider provides free telephone support on
weekdays from 8:00 AM to 4:30 PM (Pacic Time)
at 800.466.8366, 4. You may also e-mail us at
support@niterider.com.
WARRANTY
NiteRider stands behind its products with the following
warranties:
• Lifetime warranty on all mechanical components
• 2 years on electrical components
• 1 year on rechargeable batteries
To obtain warranty service, it is preferable to have your
original sales receipt. Contact the NiteRider customer
service department at 800.466.8366, ext 4 to obtain a Return
Merchandise Authorization (RMA) number. The RMA number
must be prominently displayed on the outside of your package.
The product must be properly packaged to prevent damage
in transit. For complete warranty information, please visit our
website at www.niterider.com.
RUN TIMES
The Pro 1200 Race will run up to:
The Pro 1800 Race will run up to:
Light Level
High
Med
Low
Race**
Walk
Light Level
High
Med
Low
Race**
Walk
Time*
1:45
3:30
7:00
12:00
35:00
Time*
1:30
3:00
6:00
12:00
25:00
Lumens
1200
600
300
180
80
Lumens
1800
700
400
200
80
*Run Times are approximations and will vary.
**Race mode is intended for endurance races.
NiteRider Technical Lighting Systems, Inc.
8295 Aero Place, Suite 200
San Diego, CA 92123
www.niterider.com
Fuel Gauge
The 8-step, LED fuel gauge is located
on top of the headlamp in front of the
power button. When all four LED’s
are lit solid green, the battery is fully
charged. As the battery discharges
⅛ increments of capacity, the LED’s from right to
left, successively go from solid to blinking green, to
out. With only the nal ⅛ capacity remaining one
LED blinks red. At this time, the headlamp should be
turned off and the battery recharged.
Praat mee over dit product
Laat hier weten wat jij vindt van de NiteRider Pro 1800 Race Fietslamp. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.