Handleiding Sierra Designs Moken 6 Tent

Handleiding

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461

S I E R R A D E S I G N S

MOKEN 6

equal in length and have 2 pre bends in them, so it does not

matter which pole you use. The remaining two poles will need

to be threaded through external pole sleeves along the N-O and

P-Q axis (Figure 4). Once one of the poles has been threaded

through the pole sleeve insert the pole tip into the grommets

provided at points E & F or C & D. Repeat this step for the

remaining pole. Attach the Clip Locs at points N, O, P, &

Q to their corresponding pole intersections. Now attach the

bungee cordon the four Clip Locs by wrapping the bungee in

the direction crossing the open gate of the clip. Wrap the cord

around the intersection 2 to 4 times, depending on the desired

firmness, then, slide the cord into the groove on the backside

of the clip to keep it taut (Figure 5). Next, insert the pole tips

on the shorter poles and insert into the grommets provided at

points R & S (Figure 4). Lastly, stake out points I & J. You

will notice that at both points I & J, there will be two stake

loops. One is for the rainfly and one is for the inner sleeping

room, stake them both out to the same stake. Repeat this pro-

cess for points K & L.

Stake Out the Tent

If you have not already staked out all 12 stake out loops

(Figure 4, points A-L) we suggest you do so now. Once fully

staked out work your way around the tent and make any nec-

essary adjustments so that your tent has been pitched to its

desired tautness.

Sleeping Room Set-Up/Removal

Now that your Moken 6 is pitched and you have been able

to view it from the inside you will notice that you have two

sleeping rooms and a living area. You will also notice that the

two sleeping rooms are removable. By having these two rooms

removable it allows you various options for your Moken 6, such

as, both sleeping rooms in, 1 room in and 1 room out, or both

sleeping rooms removed. In order to remove the sleeping rooms

all you need to do is unhook the “Toggle/Ring” (Figure 6) sys-

tem and then unclip the “side-release” buckles on the floor.

Ventilate the Tent

You have various options for ventilating your Moken 6. The

most effective way is to utilize the roof vents, along with the

rainfly doors. You will notice that the roof in the main living

section of your tent has two ceiling vents that allow for ventila-

tion. In addition to the ceiling vents there are four additional

vents, 2 for each sleeping room. There are also two zip down

panels within the vestibule.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sierra Designs Moken 6 Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sierra Designs. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sierra Designs Moken 6 Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sierra Designs Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Sierra Designs Moken 6 Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Sierra Designs Fire Storm Tent

Handleiding

Sierra Designs Nomad 4.1 Tent

Handleiding

Sierra Designs Bedouin 8 Tent

Handleiding

Sierra Designs Tengu Tent

Handleiding

Sierra Designs Igloo Tent

Handleiding

Sierra Designs Omega Light Tent

Handleiding

Sierra Designs Zia 2 Tent

Handleiding

Sierra Designs Solomente AST Tent

Gerelateerde categorieën