Handleiding Vtech VM3261 Babyfoon

Handleiding

Zoom

You can zoom in while viewing images from

the baby unit.

• Press to zoom in.

• Press and hold or to move the

zoomed image downward or upward.

• Press and hold or to move the zoomed

image leftward or rightward.

• Press again to zoom out.

Talk

You can use the TALK function of the parent

unit to comfort your baby.

1. Press and hold TALK on the parent unit.

The TALK light turns on.

2. Speak towards the microphone on the

parent unit. Your voice is broadcast to the

baby unit.

3. Release the TALK key to stop the

broadcast. The TALK light goes off.

Lullaby

The baby monitor has five lullabies and four

soothing sounds for you to comfort your baby.

You can play the lullabies or soothing sounds

on the baby unit using the parent unit.

1. Press MENU when the parent unit is idle.

2. Press or to choose , then press .

3. Press to choose , then press .

4. Press or to choose a lullaby, or choose

to stop playing.

5. Press SELECT to confirm your selection.

NOTE

• The lullaby stops when you started using TALK

function of the parent unit to comfort your baby. It

will resume in a few seconds after the broadcast

is ended.

Monitor the temperature

Your baby unit monitors the temperature of

your baby’s room with its built-in temperature

sensor. If the detected temperature is out of the

preset temperature range, the parent unit will

display an alert message.

Set temperature range

You can set the desired room temperature

alert range. The minimum temperature can

be set between 50

o

F (10

o

C) and 76

o

F (24

o

C). The maximum temperature can be set

between 77

o

F (25

o

C) and 102

o

F (39

o

C).

1. Press MENU when the parent unit is idle.

2. Press or to choose , then press .

3. Press or to choose , then press .

4. Press or to choose or , then

press SELECT.

5. Press or to choose the desired

minimum or maximum temperature, then

press SELECT to confirm your selection.

Temperature alert tone

You can turn on the temperature alert tone so

that the parent unit will emit an alert tone if the

detected temperature is out of range.

1. Press MENU when the parent unit is idle.

2. Press or to choose , then press .

3. Press or to choose , then press

SELECT.

4. Press or to choose or , then

press SELECT to confirm your selection.

Temperature format

You can choose to display the temperature in

Fahrenheit (

o

F) or Celsius (

o

C).

1. Press MENU when the parent unit is idle.

2. Press or to choose , then press .

3. Press or to choose , then press

SELECT.

4. Press or to choose or , then

press SELECT to confirm your selection.

Night vision

The baby unit has infrared LEDs that allow

you to see your baby clearly at night or in a

dark room. When the baby unit being viewed

detects low light levels, the infrared LEDs are

switched on automatically. The images from

the baby unit are in black and white, and

appears on screen.

NOTE

S

• It is normal if you see a short white glare on your

parent unit screen as the baby unit is adapting to

the dark environment.

• When the infrared LEDs are on, the images are in

black and white. This is normal.

TIP

• Depending on the surroundings and other

interfering factors, like lightings, objects, colors

and backgrounds, the display resolution may vary.

Adjust the baby unit’s angle or place the baby unit

at a higher level to prevent glare and blurry display.

Mount the baby unit (optional)

Your baby monitor comes ready for tabletop

use. You can also choose to mount your baby

monitor on the wall. See Mount the baby unit

(optional) in the Quick Start Guide for the wall

mounting instructions.

General product care

To keep this product working well and looking good,

follow these guidelines:

• Avoid putting it near heating appliances and devices

that generate electrical noise (for example, motors or

fluorescent lamps).

• DO NOT expose it to direct sunlight or moisture.

• Avoid dropping the product or treating it roughly.

• Clean with a soft cloth.

• DO NOT immerse the parent unit and the baby

unit in water and do not clean them under the tap.

• DO NOT use cleaning spray or liquid cleaners.

• Make sure the baby unit and parent unit are dry

before you connect them to the mains again.

Storage

When you are not going to use the baby monitor for

some time, remove the rechargeable battery from

the parent unit. Store the parent unit, the baby unit

and the adapters in a cool and dry place.

Frequently asked questions

Below are the questions most frequently asked about

the baby monitor. If you cannot find the answer to your

question, visit our website at www.vtechphones.com,

or contact 1 (800) 595-9511 for customer service.

Why does the

baby monitor

not respond

normally?

Try the following (in the order

listed) for common cure:

1. Disconnect the power to the

baby units and the parent unit.

2. Remove the batteries in the

parent unit. Then install the

batteries again.

3. Wait a few seconds before

connecting power back to the

baby units and the parent unit.

4. Turn on the baby units and the

parent unit.

5. Wait for the parent unit to

synchronize with the baby units.

Allow up to one minute for this to

take place.

Why don’t

the power-on

light of the

baby unit and

parent unit

go on when I

switch on the

units?

Perhaps the parent unit is not

connected to the power. Insert the

appliance plug into the parent unit

and put the adapter in a wall socket.

Then, press and hold to switch

on the parent unit and to establish

connection with the baby unit.

Perhaps the baby unit is not

connected to the power. Insert

the appliance plug into the baby

unit and put the adapter in a wall

socket. Then, slide the ON/OFF

switch to ON to switch on the baby

unit and to establish connection

with the parent unit.

Why doesn’t

my parent

unit charge

while

connected to

AC power?

Make sure the power is not

controlled by a wall switch.

Make sure the battery is installed.

You may have used the battery for

a long time. Replace a new battery.

Why is my

screen in

black and

white?

The screen is in black and white

during night-time or in a dark room

when the night vision feature is

activated. This is normal.

Why do I

get glare or

blurry display

on my screen

when viewing

my baby at

night?

During night-time or in a dark

room, the surroundings and other

interfering factors, like lightings,

objects, colors and backgrounds

may affect the image quality on

your parent unit screen. Adjust the

baby unit’s angle or place the baby

unit at a higher level to prevent

glare and blurry display.

Why does the

baby monitor

produce a

high-pitched

noise?

The parent unit and baby units may

be too close to each other.

• Move the parent unit away from

the baby units until the noise

stops; OR

• Turn down the volume of your

parent unit.

Why does

the parent

unit beep?

The baby units may be out of

range. Move the parent unit closer

to the baby units (but not less than

3 feet).

If the parent unit is powered by the

provided battery, it may not have

enough charge for the parent unit to

perform normally. Charge the battery

in the parent unit for up to 11 hours.

The temperature of your baby’s

room may be too high or too low.

Why does

the parent

unit react

too quickly

to other

sounds?

The baby unit also picks up other

sounds than those of your baby.

Adjust the sensitivity level to a

lower level or lower the parent unit

speaker volume.

Why don’t

I hear a

sound/Why

can’t I hear

my baby cry?

The parent unit speaker volume

may be too low or off. Press VOL+

to increase the volume.

You may have set a low sound

sensitivity level. See Adjust the

sound sensitivity of the baby

unit to set to a higher level.

Why can’t I

establish a

connection?

Why is the

connection

lost every

now and

then? Why

are there

sound

interruptions?

The baby units may be out of

range. Move the parent unit closer

to the baby units (but not less than

3 feet).

Other electronic products may

cause interference with your baby

monitor. Try installing your baby

monitor as far away from these

electronic devices as possible.

Important safety instructions

When using your equipment, basic safety

precautions should always be followed to

reduce the risk of fire, electric shock and

injury, including the following:

1. Follow all warnings and instructions marked on

the product.

2. Adult setup is required.

3. This product is intended as an aid. It is not

a substitute for responsible and proper adult

supervision and should not be used as such.

4. This product is not intended for use as a medical

monitor.

5. Do not use this product near water. For example,

do not use it next to a bath tub, wash bowl,

kitchen sink, laundry tub or swimming pool, or in

a wet basement or shower.

6. CAUTION: Use only the batteries indicated in

this manual. There may be a risk of explosion

if a wrong type of battery is used for the parent

unit. Use only the supplied rechargeable battery

or replacement battery pack (BT207695) for

the parent unit. Do not dispose of batteries in a

fire. They may explode. Dispose of used battery

according to the information in The RBRC

®

seal.

7. Use only the adapters included with this product.

Incorrect adapter polarity or voltage can

seriously damage the product.

Baby unit power adapter: Output: 5V DC 800mA

Parent unit power adapter: Output: 6V DC 500mA.

8. The power adapters are intended to be correctly

oriented in a vertical or floor mount position. The

prongs are not designed to hold the plug in place

if it is plugged into a ceiling, under-the-table or

cabinet outlet.

9. For pluggable equipment, the socket-outlet shall

be installed near the equipment and shall be

easily accessible.

10. Unplug this product from the wall outlet before

cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

11. Unplug the power cords before replacing

batteries.

12. Do not cut off the power adapters to replace

them with other plugs, as this causes a

hazardous situation.

13. Do not allow anything to rest on the power cords.

Do not install this product where the cords may

be walked on or crimped.

14. This product should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power

supply in your home, consult your dealer or local

power company.

15. Do not overload wall outlets or use an extension

cord.

16. Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.

17. This product should not be placed in any area

where proper ventilation is not provided. Slots

and openings in the back or bottom of this

product are provided for ventilation. To protect

them from overheating, these openings must

not be blocked by placing the product on a soft

surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator or

heat register.

18. Never push objects of any kind into this product

through the slots because they may touch

dangerous voltage points or create a short

circuit. Never spill liquid of any kind on the

product.

19. To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the product other than specified

access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling

can cause electric shock when the product is

subsequently used.

20. You should test the sound reception every

time you turn on the units or move one of the

components.

21. Periodically examine all components for

damage.

22. Be aware of possible loss of privacy while using

public airwaves. Conversations may be picked

up by other nursery monitors, cordless phones,

scanners, etc.

23. Children should be supervised to ensure that

they do not play with the product.

24. The product is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature

between 32

o

F and 104

o

F.

2. Do not expose the product to extreme cold, heat

or direct sunlight. Do not put the product close to

a heating source.

3. Batteries should not be exposed to excessive

heat such as bright sunshine or fire.

4. Warning—Strangulation

Hazard—Children have

STRANGLED in cords. Keep

this cord out of the reach of

children (more than 3 ft (0.9

m) away). Do not remove this

tag.

5. Never place the baby unit(s) inside the baby’s crib

or playpen. Never cover the baby unit(s) or parent

unit with anything such as a towel or a blanket.

6. Other electronic products may cause

interference with your baby monitor. Try

installing your baby monitor as far away

from these electronic devices as possible:

wireless routers, radios, cellular telephones,

intercoms, room monitors, televisions,

personal computers, kitchen appliances and

cordless telephones.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital cordless

devices):

Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless devices and implanted cardiac

pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches

from the pacemaker.

• Should NOT place wireless devices directly over

the pacemaker, such as in a breast pocket, when

it is turned ON.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons

using wireless devices.

Electromagnetic elds (EMF)

This VTech product complies with all standards

regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this

user’s manual, the product is safe to be used based

on scientific evidence available today.

The RBRC

®

seal

The RBRC

®

seal on the Ni-MH battery indicates

that VTech Communications, Inc. is voluntarily

participating in an industry program to collect and

recycle these batteries at the end of their useful

lives, when taken out of service within the United

States and Canada.

The RBRC

®

program provides a convenient

alternative to placing used Ni-MH batteries into the

trash or municipal waste, which may be illegal in

your area.

VTech’s participation in RBRC

®

makes it easy for

you to drop off the spent battery at local retailers

participating in the RBRC

®

program or at authorized

VTech product service centers. Please call

1 (800) 8 BATTERY

®

for information on Ni-MH

battery recycling and disposal bans/restrictions in

your area. VTech’s involvement in this program is

part of its commitment to protecting our environment

and conserving natural resources.

RBRC® and 1 (800) 8 BATTERY®

are registered trademarks of the

Rechargeable Battery Recycling

Corporation.

FCC and IC regulations

FCC Part 15

This equipment has been tested and found to

comply with the requirements for a Class B digital

device under Part 15 of the Federal Communications

Commission (FCC) rules. These requirements are

intended to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

WARNING: Changes or modifications to this

equipment not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

To ensure safety of users, the FCC has established

criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander

according to the intended usage of the product. This

product has been tested and found to comply with

the FCC criteria. The baby unit shall be installed

and used such that parts of all persons’ body are

maintained at a distance of approximately 8 in (20

cm) or more. The transmitter and antenna of the

parent unit shall be held at least 1 in (2.5 cm) from

your face.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

Industry Canada

This device complies with Industry Canada licence-

exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference,

including interference that may cause undesired

operation.

The term ‘’IC:‘’ before the certification/registration

number only signifies that the Industry Canada

technical specifications were met.

This product meets the applicable Industry Canada

technical specifications.

RF radiation exposure statement

The baby unit complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. The baby unit should be installed and

operated with a minimum distance of 8 in (20 cm)

between the baby unit and all persons’ body. Use of

other accessories may not ensure compliance with

FCC RF exposure guidelines. This transmitter must

not be co-located or operating in conjunction with

any other antenna or transmitter. This equipment

complies also with Industry Canada RSS-102 with

respect to Canada’s Health Code 6 for Exposure of

Humans to RF Fields.

California Energy Commission

battery charging testing mode

This baby monitor meets the California Energy

Commission (CEC) regulations for energy

consumption. Your baby monitor is set up to comply

with the energy-conserving standards right out of the

box.

Follow the instructions to install and charge the

battery. The CEC battery charging testing mode is

activated while charging.

Even if the parent unit is paired to baby units, the

CEC battery charging testing mode is activated

while it is powered off and charging.

For C-UL compliance only

Mesures de sécurité importantes

Lorsque vous utilisez votre appareil, vous devriez

toujours suivre certaines mesures de précaution

de base afin de réduire les risques d’incendie,

d’électrocution et de blessures corporelles, dont

ceux qui suivent :

1. Observez toutes les instructions et mises en

garde inscrites sur l’appareil.

2. L’installation par un adulte est requise.

3. Ce produit a été conçu pour être un dispositif

d’appoint seulement. Il n’est pas le remplacement

d’une supervision responsable et adéquate par

un adulte et ne devrait pas être utilisé comme

telle.

4. Ce produit n’est pas conçu pour être utilisé en

tant que moniteur médical.

5. N’utilisez pas cet appareil près de l’eau ni de

toute autre source d’humidité, par exemple, près

d’une baignoire, cuve à lessive, évier de cuisine,

dans un sous-sol humide ni près d’une piscine,

dans un soussol humide ou une douche.

6. MISE EN GARDE: Il peut y avoir un risque

d’explosion si vous utilisez le mauvais type de

piles pour l’unité du parent. N’utilisez que le

bloc-piles rechargeable inclus ou le bloc-piles de

rechange (BT207695). N’incinérez pas les piles.

Celles-ci risqueraient d’exploser. Jetez les piles

usées selon les renseignements suivant le sceau

du RBRC

®

.

7. N’utilisez que les adaptateurs inclus avec ce

produit. L’utilisation d’un adaptateur dont la

polarité ou la tension serait inadéquate risque

d’endommager sérieusement le produit et mettre

votre sécurité en péril.

Adaptateur de l’unité du bébé :

Sortie : 5V CC 800mA

Adaptateur de l’unité du parent :

Sortie : 6V CC 500mA

8. Lorsqu’ils sont branchés dans une prise de

courant, les adaptateurs secteur ont été conçus

pour être orientés correctement, soit à la

verticale ou au plancher. Les broches n’ont pas

été conçues pour supporter le poids du bloc

d’alimentation et le maintenir en place si celuici

est branché dans une prise au plafond, sous une

table ou dans un meuble.

9. Pour les PRODUITS À BRANCHER À UNE

PRISE DE COURANT, la prise de courant doit

être installée près du produit, afin d’assurer une

accessibilité sécuritaire à la prise de courant.

10. Débranchez ce produit de la prise de courant

avant de procéder au nettoyage. N’utilisez pas de

nettoyants en aérosols. Utilisez un chiffon humide

pour le nettoyer.

11. Débranchez les cordons d’alimentation avant de

remplacer le bloc-piles.

12. Ne coupez pas les cordons d’alimentation pour

remplacer les fiches, car ceci peut présenter un

danger potentiel.

13. Ne laissez aucun objet reposer ni appuyer sur

le cordon d’alimentation. N’installez pas cet

appareil dans un endroit où l’on risque d’écraser

le cordon d’alimentation ou de le piétiner.

14. Ne faites fonctionner cet appareil qu’avec le

type d’alimentation indiqué sur l’étiquette. Si

vous ne connaissez pas le type d’alimentation

que vous possédez à votre domicile, consultez

votre marchand ou votre compagnie locale

d’électricité.

15. Ne surchargez pas les prises de courant

murales ni les rallonges électriques.

16. Ne placez pas cet appareil sur un chariot,

meuble, trépied, support de montage ni table

chancelants.

17. Les trous et ouvertures du boîtier, situés à

l’arrière de l’appareil ou sous celui-ci, servent à

aérer l’appareil. Pour l’empêcher de surchauffer,

ne bloquez sous aucun prétexte ces ouvertures

et n’empêchez pas l’aération adéquate de

l’appareil en le plaçant sur un lit, divan, tapis ou

toute autre surface similaire. De même, ne le

positionnez pas à proximité ni au-dessus d’une

source de chaleur ou d’un calorifère. De plus,

ne placez pas l’appareil dans un endroit avant

de vous assurer qu’il y ait une bonne circulation

d’air.

18. N’enfoncez jamais d’objets à travers les

ouvertures de cet appareil, car ils pourraient

entrer en contact avec des points de tension

dangereux ou causer des courts-circuits qui

peuvent dégénérer en incendies ou en risques

d’électrocution. Ne renversez jamais de liquide

dans ce produit.

19. Afin de réduire les risques d’électrocution, ne

démontez pas cet appareil, mais apportez-le

dans un centre de service autorisé. L’ouverture

du boîtier ou le retrait de toutes pièces que

contient cet appareil, à l’exception de l’accès

autorisé à certaines portes ou ouvertures,

risque de vous exposer à des points de tension

dangereux ou d’autres dangers. Un remontage

incorrect peut par la suite présenter des risques

d’électrocution.

20. Vous devriez tester la réception chaque fois que

vous mettez l’appareil en fonction.

21. Examinez les composantes afin de vérifier si

celles-ci ne sont pas endommagées.

22. Soyez avisé de la perte de la confidentialité

lorsque vous utilisez les ondes publiques. Les

conversations peuvent être entendues par

d’autres moniteurs de bébé, des téléphones

sans fil, des scanneurs, etc.

23. Les enfants devraient être supervisés afin de

vous assurer qu’ils ne jouent pas avec l’appareil.

24. Le produit n’est pas conçu pour être utilisé

par des personnes (incluant des enfants) aux

capacités physiques, sensorielles ou mentales

réduites ou qui manquent d’expérience et de

connaissances, à moins qu’on leur ait donné

suffisamment de supervision ou d’instructions

relativement à l’utilisation de l’appareil par une

personne responsable de leur sécurité.

CONSERVEZ CES INSTRUCTIONS

Mises en garde

1. Utilisez et entreposez le produit à une

température entre 0˚ C (32˚F) et 40˚C (104˚ F).

2. N’exposez pas cet appareil à des froids ou des

chaleurs extrêmes, ainsi qu’à la lumière directe

du soleil. Ne l’installez pas près d’une source de

chauffage.

3. Le bloc-piles ne doit pas être exposé à la

chaleur excessive telle que la lumière du soleil

ou au feu.

4. Assurez-vous que le moniteur

et le cordon de l’adaptateur

sont toujours hors de portée

des enfants, àau moins 1

mètre (3 pieds) de l’enfant ou

du berceau, pour éviter tout

risque de strangulation.

5. Ne jamais placer le moniteur à l’intérieur du

berceau ou du parc de bébé. Ne jamais couvrir

le moniteur ou l’unité (s) portative avec un article

tel une serviette ou une couverture.

6. D’autres équipements électroniques peuvent

produire des interférences sur votre moniteur

vidéo et audio. Tentez d’installer votre

moniteur vidéo ou audio à l’écart des appareils

électroniques tels que des routeurs sans fil,

radios, téléphones cellulaires, interphones,

moniteurs, téléphones, ordinateurs personnels,

électroménagers et téléphones sans fil.

Stimulateurs cardiaques implantés dans

l’organisme

Les simulateurs cardiaques (ne s’applique qu’aux

dispositifs numériques sans fil) :

L’organisme ‘Wireless Technology Research, LLC

(WTR)’, une firme de recherche indépendante,

a mené une évaluation pluridisciplinaire des

interférences entre les téléphones sans fil portatifs

et les stimulateurs cardiaques implantés dans

l’organisme. Appuyée par l’Administration des

aliments et drogues (FDA) des États-Unis, la firme

WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

• Vous devriez maintenir les dispositifs sans fil à

au moins six pouces du simulateur cardiaque.

• Ils ne doivent PAS placer le téléphone sans fil

directement sur le stimulateur cardiaque, tel que

dans une poche de chemise, lorsque celui-ci est

en marche.

L’étude effectuée par l’organisme WRS n’a pas

identifié de risque pour les détenteurs de simulateurs

cardiaques causés par les gens qui utilisent

dispositifs sans fil à proximité de ceux-ci.

Champs électromagnétiques (EMF)

Ce produit de VTech est conforme à toutes

les normes se rapportant aux champs

électromagnétiques (EMF) standard. Si vous le

manipulez correctement en suivant les instructions

de ce guide, son utilisation sera sécuritaire pendant

de nombreuses années, selon les meilleures

évidences scientifiques dont nous disposons

aujourd’hui.

aujourd’hui.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to

the holder of a valid proof of purchase (“Consumer”

or “you”) that the Product and all accessories

provided in the sales package (“Product”) are

free from defects in material and workmanship,

pursuant to the following terms and conditions,

when installed and used normally and in accordance

with the Product operating instructions. This limited

warranty extends only to the Consumer for Products

purchased and used in the United States of America

and Canada.

What will VTech do if the Product is not free from

defects in materials and workmanship during

the limited warranty period (“Materially Defective

Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair

or replace at VTech’s option, without charge,

a Materially Defective Product. If we repair

the Product, we may use new or refurbished

replacement parts. If we choose to replace the

Product, we may replace it with a new or refurbished

Product of the same or similar design. We will

retain defective parts, modules, or equipment.

Repair or replacement of the Product, at VTech’s

option, is your exclusive remedy. VTech will return

the repaired or replacement Products to you in

working condition. You should expect the repair or

replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends

for ONE (1) YEAR from the date of purchase. If

VTech repairs or replaces a Materially Defective

Product under the terms of this limited warranty,

this limited warranty also applies to the repaired

or replacement Product for a period of either (a)

90 days from the date the repaired or replacement

Product is shipped to you or (b) the time remaining

on the original one-year warranty; whichever is

longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, fire, water or other

liquid intrusion; or

2. Product that has been damaged due to repair,

alteration or modification by anyone other than an

authorized service representative of VTech; or

3. Product to the extent that the problem experienced

is caused by signal conditions, network reliability,

or cable or antenna systems; or

4. Product to the extent that the problem is caused

by use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered illegible;

or

6. Product purchased, used, serviced, or shipped for

repair from outside the United States of America

or Canada, or used for commercial or institutional

purposes (including but not limited to Products

used for rental purposes); or

7. Product returned without a valid proof of purchase

(see item 2 below); or

8. Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit

our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call

1 (800) 267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls

and features may save you a service call.

Except as provided by applicable law, you assume

the risk of loss or damage during transit and

transportation and are responsible for delivery or

handling charges incurred in the transport of the

Product(s) to the service location. VTech will return

repaired or replaced Product under this limited

warranty. Transportation, delivery or handling

charges are prepaid. VTech assumes no risk for

damage or loss of the Product in transit. If the Product

failure is not covered by this limited warranty, or proof

of purchase does not meet the terms of this limited

warranty, VTech will notify you and will request that

you authorize the cost of repair prior to any further

repair activity. You must pay for the cost of repair and

return shipping costs for the repair of Products that

are not covered by this limited warranty.

What must you return with the Product to get

warranty service?

1. Return the entire original package and contents

including the Product to the VTech service

location along with a description of the malfunction

or difficulty; and

2. Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product model)

and the date of purchase or receipt; and

3. Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive

agreement between you and VTech. It supersedes

all other written or oral communications related to this

Product. VTech provides no other warranties for this

Product. The warranty exclusively describes all of

VTech’s responsibilities regarding the Product. There

are no other express warranties. No one is authorized

to make modifications to this limited warranty and you

should not rely on any such modification.

State/Provincial Law Rights: This warranty gives you

specific legal rights, and you may also have other

rights, which vary from state to state or province to

province.

Limitations: Implied warranties, including those of

fitness for a particular purpose and merchantability (an

unwritten warranty that the Product is fit for ordinary

use) are limited to one year from the date of purchase.

Some states/provinces do not allow limitations on

how long an implied warranty lasts, so the above

limitation may not apply to you. In no event shall

VTech be liable for any indirect, special, incidental,

consequential, or similar damages (including, but

not limited to lost profits or revenue, inability to use

the Product or other associated equipment, the cost

of substitute equipment, and claims by third parties)

resulting from the use of this Product. Some states/

provinces do not allow the exclusion or limitation of

incidental or consequential damages, so the above

limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof

of purchase.

Technical specications

Frequency

control

Crystal controlled PLL synthesizer

Transmit

frequency

Baby unit: 2405 - 2475 MHz

Parent unit: 2405 - 2475 MHz

Channels 32

LCD 2.8” Color LCD

(WQVGA 320x240 pixel)

Nominal

effective

range

Maximum power allowed by FCC

and IC. Actual operating range may

vary according to environmental

conditions at the time of use.

Power

requirements

Parent unit: 3.6V Ni-MH battery

Baby unit power adapter: Output:

5V DC @ 800mA

Parent unit power adapter: Output:

6V DC @ 500mA

Specifications are subject to change without notice.

© 2018 VTech Communications, Inc.

All rights reserved. 01/18. VM3261-X_CIB_V1.

Document order number: 91-010873-010-100

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Vtech VM3261 Babyfoon. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Vtech. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Vtech VM3261 Babyfoon in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Vtech Babyfoons
Meer handleidingen voor Babyfoons

Veelgestelde vragen over Vtech VM3261 Babyfoon

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Vtech VM3261-2 Babyfoon

Handleiding

Vtech VM5251-2 Babyfoon

Handleiding

Vtech VM3251 Babyfoon

Handleiding

Vtech VM301 Babyfoon

Handleiding

Vtech TM8212 Babyfoon

Handleiding

Vtech VM3251-2 Babyfoon

Handleiding

Vtech TM8212-2 Babyfoon

Handleiding

Vtech VM303 Babyfoon

Gerelateerde categorieën