Handleiding Bikemate MCP 30102 Fietscomputer

Handleiding

MCP 30102

4 x

1 x

1 x

1

oder / or

?

A

B

90°

B.1 B.2

B.3 B.4

4x

4x

2

oder / or

+

oder

or

/

3

+

4

max. 5mm

5

oder / or

6

45°

click!

A

+

-

!

D

Enter button S

Mode buttonM-I Mode-button M-II

CLOCK

TRIP

KM+

KCAL

CAL

ODO

MAXSPD

AVSPD

RIDET

SCAN

CLOCK

MXTEMP

MNTEMP

TEMP°C

STW

FATB

TIME +

CLOCK

MXTEMP

MNTEMP

TEMP°C

STW

FATB

TIME +

AFTER SALES SUPPORT

Helpline: 00800 147 03 690

International freecall www.mcp-ag.net

Box Includes

1 bike computer, 1 speed sensor, 4 cable ties, 1 spoke

magnet, 2 o-rings 32mm, 1 o-ring 42mm, 1 instruction

manual, 1 warranty card

Warranty Period 36

5596

04/2008

Helpline: 00800 147 03 690

1

2

1

/

2

x

1

.

7

5

44-559 26x1.6

47-559 26x1.75x2

50-559 26x1.9

54-559 26x2.00

57-559 26x2.125

37-590 26x1 3/8

37-584 26x1 3/8x1 1/2

20-571 26x3/4

32-630 27x1 1/4

28-630 27x1 1/4 Fifty

40-622 28x1.5

47-622 28x1.75

40-635 28x1 1/2

37-622 28x1 3/8x1 5/8

18-622 700x18C

20-622 700x20C

23-622 700x23C

25-622 700x25C

28-622 700x28C

32-622 700x32C

37-622 700x35C

40-622 700x40C

2051

2070

2089

2114

2133

2105

2086

1954

2199

2174

2224

2268

2265

2205

2102

2114

2133

2146

2149

2174

2205

2224

1

2

1

/

2

x

1

.

7

5

WS

C

WS

Caution: Do not install the magnet on the same position as the

transmitter. The ideal mounting points are in the lower, or in the

upper half of the transmitter (Please see picture 5).

Attaching the Computer (See Picture 6)

After installing the holder, sensor and magnet, you can attach

the computer. Insert the computer into the computer holder

turned approx. 45° to the left.

Turn the computer clockwise with gentle pressure until it firmly

sits in the holder. To remove the computer turn it clockwise in

the opposite direction.

Description of the buttons

For the Description of the buttons please see Picture D.

Description of Symbols

Replace battery as soon as possible.

Symbol for maintenance interval, indicates pre-

programmed servicing.

Symbol for continuous display of trip data.

Graphically shows the relation between current speed

in relation to the average speed

Basic Settings Language Sprache

To save the battery during shipment and warehousing, your

BIKEmate bicycle computer is kept in the so called delivery state.

The display is inactive. To start the Setup of your bicycle computer

press any button. Now you can select a language for your

bicycle computer from German, English and French.

Basic Settings Wheel Size

Please find information for the evaluation of wheel size in

pictures B and C.

Basic Settings Total Odometer

When you use your BIKEmate bicycle computer for the first time,

it is possible for you to set it to the previous mileage recorded

on your former bicycle computer.

Basic Settings Service

Modern bicycles are technically complex machines and should

be checked and serviced by trained personnel at regular intervals.

Your BIKEmate bicycle computer helps you to have such services

carried out at the right times. Your bicycle dealer will be glad

to recommend the ideal mileage between services.

Basic Settings Body Weight

The BIKEmate bicycle computer can calculate the calories

consumed per trip. For precise calculation the software requires

your body weight.

Basic Settings 12/24 Hour Format

Your BIKEmate bicycle computer is capable of displaying the

time in 12 or 24 hour format.

Basic Settings Time

After the Setup is done your bicycle computer changes over to

display the time.

Basic Functions and Additional Options

In order to blank out unused functions your BIKEmate bicycle

computer is divided into basic functions and additional options.

On delivery all additional functions are off.

The basic functions can be displayed by pressing theM-I-Button

and they appear in the following order:

Minimum and Maximum Temperature, Adjustable Timer, Current

Calorie, Adjustable Trip Distance and Scan-Mode can be added

or removed at your choice .

Please press theM-II-Button to display the following functions:

To display the single functions please press the buttons M-I

and M-II.

Menu Time and Stopwatch

Your BIKEmate bicycle computer can be used for regular time

display as well as for stopwatch mode.

Menu Temperature

The temperature measurement and temperature memory features

allow you to read off and record different temperatures (Current,

Minimum and Maximum Temperatures) during a trip, such as

occur over greatly varying altitudes.

Trip Distance and Trip Time Menu

The trip mileage and trip time features help you to organize your

bicycle trip optimally and keep a record of your trips. Please

note that the delete function for this data also affects the other

data logged for the trip!

Menu Average and Maximum Speed

The Average speed feature allows you to calculate your

anticipated time of arrival during a trip. If you keep a training

log, this value is also suitable for recording your training

achievement.

Menu Odometer

The Odometer feature of your bicycle computer accumulates all

ridden and preset kilometres.

Menu Calories

If you want to reduce your weight or body fat with your bicycle

training program, the BIKEmate bicycle computer can help you to

check your training achievement. The bicycle computer automatically

determines the kilo-calories or fat burned during each trip.

Menu Fatburn

By pressing theM-I-Button you switch over to the Fatburn

Menu. The bicycle computer shows the approx. value of burned

fat based on the unit of weight in Kilogram or Pounds which you

defined in the setup.

Menu Adjustable Trip Distance

With the Adjustable Trip Distance feature you can set tours

according to a guide book or road map (km-) or you can input

sections into the tour such as mountain ascents (km+). This

feature can also be used for training intervals.

Menu Timer +/-

You can use the timer either as a countdown timer (Time ),

when you want to set a training time or you can use it as an

additional stopwatch (Time +).

Menu Scan

This feature allows you to review all information saved

without having to remove your hands from the handlebars to

switch the display.

Pressing theM-IIbutton briefly during the Adjustable Trip

Distance switches the display to the Scan mode. While in scan

function the display shows all information for the current trip

at intervals of 2 seconds.

Speed comparison

During the ride your BIKEmate bicycle computer will illustrate

by means of an arrow symbol your current speed in relation to

your average speed.

The arrow pointing upwards indicates that your current speed is at

least 1Km/h greater than the average speed of your current trip.

The arrow pointing downwards indicates that your current speed

is at least 1Km/h lower than the average speed of your current trip.

Both arrows shown in the display indicate that your speed is in

line with the average speed of your current trip.

Background light

The background light allows you to read off the computer display

even with low visibility or in darkness.

Replacing Battery (See picture A)

You can change the batteries of your BIKEmate bicycle computer

without losing the set up values and additional options.

When the LOW battery symbol appears on the display it is

time to change the battery.

Open the battery cover on the rear of the computer by turning

it anti-clockwise with the aid of a coin or similar instrument.

You have 15 Seconds to replace the battery and reattach the

battery cover. During this time your bicycle computer keeps all

set up data and additional options.

Preserving Battery Life

To preserve the durability of the battery your BIKEmate bicycle

computer switches over to the following modes after pre-set times:

If the bicycle computer receives no signal from the sensor or if

no button is pressed for longer than 15 Minutes, the computer

switches to sleep mode. Now the display shows only the time

and the BIKEmate Logo.

If the bicycle computer receives no signal from the sensor or if

no button is pressed for longer than 7 days, the computer

switches off the display completely. Reactivate your bicycle

computer by pressing the button M-I or M-II. The display

shows the last function you used.

Restart / Reset

If the display no longer reacts or errors are present, this can

usually be corrected by restarting (resetting) the computer. Press

and hold the buttons M-I and M-II until the display ceases.

Then release the buttons. The computer restarts with the menu

for the Basic Settings and should now function properly.

Warranty

The Guarantee period is three years and starts on the day of

purchase.

Please keep your receipt as proof of purchase.

During the guarantee period you can send your product in to be

repaired via freight forwarding to our service centre.

The batteries, straps, and glass are not included under this

warranty. Once the guarantee has expired you can still send

your product in to be repaired, however you will be liable for

the costs. The guarantee is void if the product has been misused

or mistreated in any way and or has been repaired by anyone

other than our service centre.

Your statutory rights are not affected in any way.

See below for service address.

Technical Data

Battery: CR 2032

Protected against water splashes

MCP (Multi Consumer Products) AG, Rudolf-Diesel-Straße 9, D-61267 Neu-Anspach, Germany

Safety Precautions

- Please read and observe these operating instructions and

particularly the following safety precautions for the safe and

successful use of your new BIKEmate bicycle computer.

- When riding your bicycle give primary attention to the traffic

and check the display on your computer only when safe to do so.

- Learn how to operate your computer before starting a trip and

program the computer before beginning a trip or during a break.

- Keep these instructions safe and give them to any other users.

Safety Precautions, Batteries

- Never recharge batteries! Explosion hazard!

- Keep batteries away from children, do not short-circuit, break

open or throw onto fire.

- If a battery is swallowed consult a physician immediately.

- When inserting the batteries pay attention to the polarity.

- Clean battery and unit contacts as required before installing.

- Remove discharged batters from unit immediately due to

increased danger of leakage!

- Never subject batteries to extreme temperatures

- Failure to follow these precautions can cause the batteries to

discharge beyond their maximum voltage and leak!

Remove batteries immediately to avoid damage.

- Avoid contact with skin, eyes and mucus membranes. After

contact with battery acid rinse affected areas with large

quantities of clean water and consult a physician immediately.

Instructions for Use

- Do not use force to open the computer! Have such work done

by an authorized service agent.

- Do not expose the computer to extreme weather conditions.

- Avoid contact with solvents, concentrated cleaning agents, etc.

Use a soft rag with water and mild soap to clean the computer.

- Avoid subjecting the computer to hard impacts or improper

handling.

- Do not use a water jet, garden hose or high pressure cleaner

on the bicycle computer.

- Remove the batteries during long intervals between trips,

during the winter season, etc.

Disposal instructions:

When no longer required, dispose of the product packaging in

an environmentally sound manner. Do not dispose used batteries

with domestic waste; take them to a collection point for used

batteries. It is a legal requirement that the used device must be

disposed of properly at the end of its service life.

Check with your local disposal authorities.

Package Contents

1 BIKEmate bicycle computer

1 Computer holder (handlebar mount)

1 Spoke magnet with clamp

1 small rubber ring (32 mm)

1 big rubber ring (42 mm)

4 cable straps

Installation of computer holder (see Picture 1 & 2)

First remove the protective foil on the rear of the computer

holder.

Then hook the rubber ring which best matches the diameter of

your handlebars onto one of the hooks on the computer holder.

Then position the holder on the handlebars at the previously

determined angle. Guide the bottom part of the rubber ring

under the handlebars and attach to the hook on the other side.

Alternatively you can also fasten the computer holder with the

cable straps included. To do this, guide the cable straps through

the openings provided for this purpose and pull them down tight.

Cut off the excess at the end with a pair of scissors.

If you want to attach the computer holder to the stem please

do the following:

Loosen the 4 screws underneath the computer holder with a

screwdriver. Then disconnect the lower and upper sides of the

holder.

Then turn the lower side of the holder 90° and connect it to the

upper side of the holder by fastening the 4 screws again.

Mounting the Sensor (See picture 3)

Next fix the bracket mount to the handle bar. The sensor cable

is contrary to the direction of motion. Take the cable, guide it

under the bar and start winding it around the brake wire. Continue

winding the cable towards the fork.

Make sure that the cable is securely fixed and cannot come into

contact with/get trapped by the front tyre.

Reach through the middle of the fork to start mounting the

sensor by using one of the rubber rings. The size of the rubber

rings depends on the diameter of the fork. Use the cable ties

as an alternative method for fixing the sensor.

Installation of spoke magnet (See picture 4 and 5)

Screw the magnet onto one of the outer spokes opposite the

valve.

The distance between the magnet and the transmitter should

be between 1 mm and 4 mm. If necessary correct the position

of the transmitter and swivel it.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Bikemate MCP 30102 Fietscomputer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Bikemate. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Bikemate MCP 30102 Fietscomputer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Bikemate Fietscomputers
Meer handleidingen voor Fietscomputers

Veelgestelde vragen over Bikemate MCP 30102 Fietscomputer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Bikemate 22970 Fietscomputer

Handleiding

Bikemate E83005 Fietscomputer

Handleiding

Bikemate 22975 Fietscomputer

Handleiding

Bikemate T52432 Fietscomputer

Handleiding

Bikemate 22967 Fietscomputer

Handleiding

Pro Scio Fietscomputer

Handleiding

Sigma EOX View 1200 Fietscomputer

Handleiding

Garmin Edge 1040 Fietscomputer

Gerelateerde categorieën