Handleiding Crivit IAN 294079 Fietslamp

Handleiding

GB/IE/NI

GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI

Operation

Switching on / off

The headlight

6

has three brightnesses.

On / Off switch

4

press once Automatic mode:

The light intensity adapts automatically to ambient lighting conditions. When automatic

mode is switched on

5

the switch flashes green.

press twice Power mode (50 Lux) for riding in unlit areas

press three times Standard mode (25 Lux) for riding in lit areas

press four times Eco mode (10 Lux) for riding in well lit areas

press five times power off

Tail light with brake indicator function

press once Day-mode:

Tail light is off. Brake indicator function is active. Day-mode display

13 b

flashes green.

press twice Night-mode:

Tail light is on. Brake indicator function is active.

press three times power off

Charging the headlight / tail light (see Fig. D + E)

Remove the rubber cover from the battery charging socket

17

and connect the USB cable

16

to the

battery charging socket

17

.

Then connect the USB plug of the USB cable

16

to a computer / laptop / standard USB charger with

5 V DC and 500–1000 mA. Using chargers with different specifications can damage the rechargeable

battery, thus the headlight. Doing so will void the warranty.

The headlight

6

and tail light

14

feature a battery indicator. If the indicator lights up red, the rechargea

ble

batteries are drained. The indicator will light up green whilst charging. When the rechargeable batteries

are ready to be used again, the indicator will go out and you can use the headlight

6

and tail light

14

.

For the built-in rechargeable battery to operate at full power, please do not charge the headlight rec

harge-

able battery for less than 6 hours the first time (tail light: no less than 5 hours). Please do not stop charg-

ing sooner, even if the LED is already extinguished. After this, a charging time of approx. 3.5 hours is

recommended for the headlight (recommended charging time for the tail light is 2.5 hours).

Cleaning and care

Never fully immerse the lights. Do not use corrosive or abrasive cleaning agents. Doing so will damage

the lights.

Clean the LED bicycle light set with a slightly damp, lint-free cloth.

Safety instructions for rechargeable batteries

CAUTION! EXPLOSION HAZARD! Keep rechargeable batteries away from

children, do not throw rechargeable batteries into fire, do not short-circuit and do

not take apart.

Failure to observe this instruction may result in the rechargeable batteries discharging beyond

their end voltage. This poses a risk of leaking.

Avoid contact with the skin, eyes and mucous membranes if fluid has leaked from the recharge-

able batteries. In the event of contact with battery acid, thoroughly flush the affected area

with clean water and seek immediate medical attention.

Note: If the red rechargeable battery control light

5

,

13

on the headlight

6

or the tail

light

14

lights up, please recharge the rechargeable batteries immediately.

Please note, once the rechargeable battery control system lights up, the lights no longer

comply with the Road Traffic Act.

Installation

Installing the headlight (see Fig. A)

Unscrew the retaining screw

3

from the bracket

1

.

Position the bracket

1

in the desired location on the handlebar. If necessary, use the reducer

rubbers

2

to ensure an optimal fit.

Reinstall the retaining screw

3

.

Tighten the screw hand tight. To prevent damage, do not use tools for this step.

To adjust to the optimal angle to the direction of travel, loosen the angle adjustment screw

7

2–3 turns

using a cross-tip screwdriver.

Adjust to the desired angle and tighten the angle adjustment screw

7

.

Slide the headlight

6

into the bracket

1

until you hear it lock into place.

To release, press the headlight lock

8

and slide the headlight

6

forward out of the bracket

1

.

ATTENTION! Routinely verify the headlamp adjustment. The light cone must point straight ahead, in

the direction of travel, and must not be adjusted too high so as not to blind oncoming traffic.

Installing the tail light (see Fig. B + C)

Secure the bracket

9

to the seat post or the rear cross-bar using the rubber tab

11

. Be sure there are

no objects in front of the tail light

14

.

Tighten and hook in the rubber tab

11

.

Loosen the retaining screw

15

on the bracket

9

and adjust to desired angle.

Then tighten the screw. Tighten the screw hand tight. To prevent damage, do not use tools for this step.

Slide the tail light

14

into the bracket

9

until you hear it lock into place.

To remove the tail light

14

press the tail light locking mechanism

10

and take off the tail light

14

.

ATTENTION! The tail lamp must be installed and adjusted so the reference axis is parallel to the median

longitudinal plane of the vehicle and parallel to the road.

9

Tail light bracket

10

Tail light lock

11

Tail light bracket rubber tab

12

Tail light on / off switch

13 a

Tail light rechargeable battery control system

13 b

Day-mode display

14

Tail light

15

Retaining screw tail light holder

16

USB cable

17

Rechargeable battery charging socket

(front and rear lights)

Scope of delivery

1 Headlight

1 Tail light

1 Headlight bracket

1 Tail light bracket

Reducer rubbers

1 USB cable

1 Instructions for assembly and use

Technical data

Headlight (auto-dimming)

Model designation: LI-2A / XC-195S

Rated output: 1 W

Protection type: IP44 according to

DIN EN 60529

Rechargeable

Li-ion battery: 1300 mAh, 3.7 V

Tail light

Model designation: LR-1B / XC-242P

Rated output: 0.2 W

Protection type: IP44 according to

DIN EN 60529

Rechargeable

Li-ion battery: 300 mAh, 3.7 V

Safety instructions

DANGER TO LIFE AND RISK OF ACCIDENT FOR IN-

FANTS AND CHILDREN! Never leave children unsupervised with the packing

material due to the suffocation hazard posed by swallowing parts thereof. Children

frequently underestimate the dangers.

Always keep the product away from children. This product is not a toy!

This product may be used by children 8 years and up as well as by persons with physical,

sensory or mental impairments or lacking experience and knowledge, when supervised or

instructed in the safe use of the product and understand the associated risks. Do not allow

children to play with the product. Cleaning and user maintenance must not be performed by

children without supervision. Please note, damages caused by incorrect handling, non-com-

pliance with the operating instructions or interference with the device by unauthorised indi-

viduals are excluded.

Never take the product apart. Improper repairs can put the user in considerable danger.

Repairs should only be carried out by specialist personnel. The LED lights are not replaceable.

RISK OF LOSS OF LIFE AND ACCIDENT! Using the incorrect charger

may cause the headlight

6

and the tail light

14

to be damaged, overheat or even explode.

Doing so will void the warranty.

List of pictograms used

Read the instructions!

Improper disposal of rechargeable

batteries may result in environmental

damage!

Danger to life and risk of accident

for infants and children!

USB – Universal Serial Bus – Connection

port, e.g. on a computer (charging only).

Observe the warnings and safety

notices!

K XXXXX

German Federal Motor Transport

Authority test symbol (K followed by

approval number).

Caution! Explosion hazard!

Product and packaging should be

disposed in an environmentally friendly

manner.

Green Dot - Packaging recycling.

21

PAP

Recycling code for cardboard disposal.

Symbol identifying electrical and

electronic devices.

Product meets the applicable European

product-specific directives

LED Bike light set

Introduction

Congratulations on the purchase of your new device. In doing so you have chosen a top-quality

product. The instructions for use are to be considered as part of this product. It contains important

safety, assembly and disposal information. Before using the product, please familiarise yourself

with all the safety information and instructions for use. The product must only be used as described and for

the specified fields of application. If you pass the product on to anyone else, please be sure to also include

all documentation.

Intended use

This product is suitable for lighting the roadway whilst cycling. The LED Bicycle Light Set is approved as ex-

clusive lighting for all bicycles. Light distribution must not be impaired by other bicycle parts or luggage. The

product is intended for outdoor use. Any use other than the aforementioned or any product modification is

prohibited and can result in injuries and product damage. The manufacturer is not liable for damages result

-

ing from improper use. This product is not intended for commercial use.

Parts description

1

Headlight bracket

2

Reducer rubber

3

Headlight bracket retaining screw

4

Headlight on / off switch

5

Headlight rechargeable battery control system

with integrated automatic mode indicator

6

Headlight

7

Headlight angle adjustment screw

8

Headlight lock

Disposal

The packaging is made of environmentally friendly materials, which may be disposed

of through your local recycling facilities.

Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly, not without household

waste, when it has reached the end of its useful life. Please contact your local authority for infor

-

mation on collection points and their opening hours.

Defective or old rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and

its amendments. Return rechargeable batteries and / or the device to the recycling facilities provided.

Improper disposal of rechargeable batteries may

result in environmental damage!

Rechargeable batteries may not be disposed with household waste. They may contain toxic heavy metals and

are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium,

Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.

Improper rechargeable battery disposal destroys valuable resources and the hazardous substances in the

rechargeable batteries may pose a significant danger to human health and environment. Separate collection /

disposal of old rechargeable batteries prevents dangers to human health and environment, and valuable

resources regained by recycling.

Warranty

Dear customer,

This device is covered by a 3-year warranty from the date of purchase. In the event of product defects, you

have legal rights against the retailer of this product. Your statutory rights are not limited in any way by our

warranty detailed below.

Warranty terms

The warranty period begins on the date of purchase. Please retain the original receipt safely. This documen-

tation is required as the proof of purchase. Should a defect in material or manufacture occur within three

years from the date of purchase of this product, we will repair or replace - at our choice - it free of charge.

This warranty is conditional on the defective device and the receipt of purchase being presented within the

three year warranty period, and that there is a brief written description of the nature of the defect and of the

date it arose. If the defect is covered by our warranty, you will receive the repaired product or a replacement.

A repair or exchange of the device does not extend a new warranty period. The warranty period will not be

extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage

or defects present at the time of purchase must be reported immediately after unpacking. Repairs made after

the expiration of the warranty period are subject to payment.

Item No. 14141

A

2

1

6

4 5

8

7

3

ESC

F1

~

`

!

1

F2

@

TAB

CAPS

E

lock

lock

C

~

`

ESC

F1

!

1

F2

@

TAB

CAPS

D

17

16

lock

B

14

15

12

13 a 13 b

11

9

10

17

16

IAN 294079

LED BIKE LIGHT SET

LED BIKE LIGHT SET

Operation and Safety Notes

LED-FAHRRADLEUCHTEN-SET

Bedienungs- und Sicherheitshinweise

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Crivit IAN 294079 Fietslamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Crivit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Crivit IAN 294079 Fietslamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Crivit Fietslampen
Meer handleidingen voor Fietslampen

Veelgestelde vragen over Crivit IAN 294079 Fietslamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.