Handleiding Nitecore MH2C Zaklamp

Handleiding

®

User Manual

Features

• Premium CREE XM-L2 T6 LED

• Maximum output of 800 lumens

• High efficiency regulation circuit

• Maximum runtime of up to 28 hours

• Intelligent charging circuit with voltage detection charges safely and rapidly

• Integrated micro USB charging port is water, dust and impact resistant.

• Multiple output modes are conveniently accessed via rapid rotary switch

• User-defined mode provides customized brightness levels plus strobe and SOS modes.

• Intelligent memory function stores preferred brightness setting

• Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium

batteries

• Optimized ultra-precise reflector offers a longer beam distance than competing

products

• Waterproof in accordance with IPX-8 (submersible to two meters)

• Toughened ultra-clear mineral glass with anti-reflective coating

• Constructed from aerospace-grade aluminum alloy

• HAIII military grade hard-anodized

• Reverse polarity protection

• Stainless steel titanium-plated clip

• Anti-rolling design

Dimensions

Length: 150mm (5.9”)

Head Diameter: 25.4mm (1”)

Tail Diameter: 25.4mm (1”)

Weight: 90grams (3.17oz)(without battery)

Thanks for purchasing NITECORE!

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000 FAX: +86-20-83882723

E-mail: [email protected] Web: www.nitecore.com

Address： Rm1401, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Battery Options

The All-Round Flashlight Expert

Operation instructions

Battery installation (see adjacent diagram)

1. Unscrew the tail cap in a counter-clockwise

direction.

2. Insert one 18650 battery or two CR123

batteries with the positive pole pointing

forward (toward the light head).

NOTE:

Ensure batteries are inserted with the

positive (+) end pointing to the head. The

MH2C will not operate with incorrectly

inserted batteries.

Charging indicator light

1. Connect the charging cable to the flashlight and the A/C power adapter to the wall

outlet as shown in the adjacent image. Fully charging a depleted 18650 battery

takes approximately 6 hours.

2. Under normal charging conditions, the red indicator light near the charging port will

blink twice every second.

3. If a problem is detected during the charging process, the MH2C will stop charging

and the red indicator will blink rapidly. This is usually caused by faulty or

incorrectly inserted batteries.

4. When charging is complete, the red indicator will illuminate steadily.

Accessories

Nitecore 18650 Li-ion battery(NL183),

tactical ring, lanyard, USB cable, clip,

holster, spare switch cap and spare

O-ring

*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to

charge non-rechargeable batteries, CR123 or RCR123 batteries.

Brightness & Runtime

18650

2×CR123

TURBO HIGH MID LOW

LUMENS

300

LUMENS

800

LUMENS

130

LUMENS

50

28

h

2

h

1

h30min

7

h45min

8

h30min

3

h15min

22

h

3

h

190m

(Beam Distance)

9300cd (Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m (Impact Resistant)

NOTICE

Stated data has been

measured according to

the international flashlight

testing standards

ANSI/NEMA FL1 using a

quality NITECORE 18650

(3.7V 2600mAh) battery or

two SYSMAX CR123 (3V

1550mAh) batteries under

laboratory conditions. The

data may vary due to

individual usage habits

and environmental

conditions.

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop

the ANSI FL1 standard of measurement. Product testing data is in accordance with

these internationally recognized scientific standards.

Caution:

The MH2C needs to be turned on in

order to enter charging mode.

Switching ON/OFF

To switch ON: Press the button on the tailcap until a “click” is heard.

To switch OFF: Press the button on the tailcap a second time until a “click” is heard.

Mode Switching

The Nitecore MH2C has two modes: Turbo and user-defined. These two modes can

be changed by simply tightening and loosening the flashlight head. Turbo provides

100% output while user-defined contains five selectable sub-modes.

Turbo Mode

Turbo mode provides an output of 800 lumens and is accessed when the flashlight is

switched ON with the head lightly tightened. While in this mode, momentary

illumination can be achieved by switching off the flashlight and then half pressing and

holding the switch.

Note: After three minutes of use in turbo mode, the flashlight will lower its

output automatically to preventing overheating and increase runtime.

User-Defined Mode

User-defined mode is accessed by slightly loosening the flashlight head. In this mode,

lightly and rapidly pressing the switch will cycle through brightness and other

functions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all

the way down will save and memorize a desired setting.

Tips: Make NITECORE MH2C your perfect Multitask Hybrid flashlight.

NITECORE MH2C flashlights essentially have two modes: Turbo mode (100% output)

and custom mode. Turbo mode is accessed by tightening the flashlight head while

any of the five customizable modes (strobe, SOS, low, medium and high) are selected

by loosening the head and rapidly pressing the on/off switch to cycle through the

modes. A given mode can be saved by simply turn off the light while in that mode.

Real-world examples include: When used as a flashlight around the home, the head

can be loosened and low level selected in custom mode, providing long runtimes at a

lower light intensity. The same flashlight could then be taken out and used a

law-enforcement duty light, with user-defined mode set in strobe, making it easy to

alternate between turbo mode and strobe with a simple twist of the flashlight head.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating

of silicon-based lubricant.

Warranty Service

All NITECORE

®

products are warranted for quality. DOA / defective products can be

exchanged for replacement though a local distributor/dealer within the 15 days of

purchase. After 15 days, all defective / malfunctioning NITECORE

®

products will be

repaired free of charge for a period of 60 months from the date of purchase. After 60

months, a limited warranty applies, covering the cost of labor and maintenance, but

not the cost of accessories or replacement parts. The warranty is nullified in all of the

following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE

®

products and services, please contact your

national NITECORE

®

distributor or send an email to [email protected]

Charging Function

The MH2C is capable of charging a protected 18650 Li-ion battery via the included

USB cable. Simply install a protected 18650 Li-ion cell, plugging one end of the USB

cable into the flashlight and the other end into a universal USB port / adaptor and the

MH2C will take care of the rest.

Please follow our facebook for

more info: NITECORE Flashlights

SIZE

Nominal voltage

Compatible

Primary Lithium battery *

CR123 3V

Yes (Compatible but can

NOT be recharged)

Yes (Compatible but can

NOT be recharged)

18650 Rechargeable Li-ion battery

18650 3.7V

Yes (Compatible and

can be recharged)

Rechargeable Li-ion battery *

RCR123

3.7V

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore MH2C Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore MH2C Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore MH2C Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.