Handleiding Nitecore MH40GT Zaklamp

Handleiding

®

User Manual

Features

• Premium CREE XP-L HI V3 LED

• Maximum output up to 1000 lumens

• High efficiency regulation circuit for a maximum runtime up to 130 hours

• Optimized ultra-precise reflector offers a beam distance up to 803 meters

• Intelligent charging circuit with voltage detection charges safely and rapidly

• Onboard charging port sleeve protects the port from dust and water ingression

• Four easily accessible brightness levels

• User defined mode allows for quick access to the setting last used

• Intelligent memory function stores preferred brightness settings

• Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium

batteries

• Waterproof in accordance with IPX-8 (submersible to two meters)

• Stainless steel bezel ring protects core components from damage

• Toughened ultra-clear mineral glass with anti-reflective coating

• Constructed from aerospace-grade aluminum alloy

• HAIII military grade hard-anodized

• Reverse polarity protection

• Stainless steel titanium-plated clip

• Anti-rolling design

Dimensions

Length: 9.84” (250mm)

Head Diameter: 2.36” (60mm)

Tail Diameter: 1”(25.4mm)

Weight: 10.65oz(302g)(without battery)

Thanks for purchasing NITECORE!

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000 FAX: +86-20-83882723

E-mail: [email protected] Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Battery Options

The All-Round Flashlight Expert

Operating Instructions

Battery Installation

1. Unscrew the tailcap counter-clockwise.

2. Insert two 18650 batteries or four CR123

batteries with the positive ends pointing

towards the light head.

NOTES:

1. Do not mix rechargeable and

non-rechargeable batteries.

2. Do not mix batteries of different

types/brands.

3. Do not mix batteries of different power levels.

blink twice every second.

2. If a problem is detected during the charging process, the MH40GT will stop

charging and the red indicator will blink rapidly. This is usually caused by damaged

or incorrectly inserted batteries.

3. When charging is complete, the red indicator will illuminate steadily.

Accessories

Two Nitecore 18650 Li-ion batteries(NL183),

tactical ring, lanyard, charger, clip, holster,

spare tailcap switch cover and spare O-ring

*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to

charge non-rechargeable batteries, CR123 or RCR123 batteries.

Brightness & Runtime

TURBO HIGH MID LOW

LUMENS

325

LUMENS

1000

LUMENS

88

LUMENS

13

130

h

27

h

2

h

15

min

4

h

45

min

6

h

45

min

75

h

18

h

1

h

30

min

803m

(Beam Distance)

161,300cd

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m

(Impact Resistant)

4×CR1232×18650

NOTICE

Stated data has been

measured according to the

international flashlight testing

standards ANSI/NEMA FL1

using two quality NITECORE

18650 (3.7V 3400mAh)

batteries or four SYSMAX

CR123 (3V 1700mAh)

batteries under laboratory

conditions. The data may

vary due to individual usage

habits and environmental

conditions.

Cautions:

1. The MH40GT needs to be turned

on in order to enter charging mode.

2. Do not charge batteries of

different types or different brands

together.

Switching ON/OFF

To switch ON: Press the tailcap switch until a “click” is heard.

To switch OFF: Press the tailcap switch again until a “click” is heard.

Mode Switching

The Nitecore MH40GT has two modes: Turbo and User-defined. These modes are

interchangeable by tightening and loosening the flashlight head. Turbo provides 100%

output while User-defined contains five selectable brightness levels and functions.

Turbo Mode

Turbo mode (1000 Lumens) is accessed by tightening the flashlight head. In this

mode, press the tailcap switch partway down to momentarily turn on MH40GT, and

release to turn it off. Momentary illumination can be applied for signaling and tactical

purposes.

Note: in Turbo mode, the fast generated heat can increase flashlight temperature and

consequently affect user experience or even flashlight life. Therefore, MH40GT will

automatically lower its brightness level after 5 minutes in Turbo mode to control

temperature and prolong battery life. You can switch back to Turbo mode if necessary,

but using Turbo for extended period is not recommended.

User-Defined Mode

User-defined mode is accessed by slightly loosening the flashlight head. In this mode,

lightly and rapidly pressing the switch will cycle through brightness and other

functions in the following order: “High-Mid-Low-SOS-Strobe”. The MH40GT will

memorise the desired setting approximately 8 second after it is turned off.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating

of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning

NITECORE® product can be repaired free of charge for a period of 60 months (5

years) from the date of purchase. Beyond 60 months (5 years), a limited warranty

applies, covering the cost of labor and maintenance, but not the cost of accessories

or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact

alocal NITECORE® distributor or send an email to [email protected]

※All images, text and statements specified herein this user manual are for

reference purpose only. Should any discrepancy occurs between this manual

and information specified on www.nitecore.com, information on our official

website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to

interpret and amend the content of this document at any time without prior

notice.

Charging Function

MH40GT is capable of charging two protected 18650 Li-ion batteries. As illustrated,

loosen the metal sleeve (counter-clockwise) and connect the charging port to a power

socket via the included charging cable. Switch the product on to begin charging. The

average charging time for two 3400mAh 18650 rechargeable Li-ion batteries is 5

hours.

1. Under normal charging conditions, the red indicator light near the charging port will

TYPE

Nominal voltage

Compatible

Primary Lithium battery *

CR123 3V

Yes (Compatible but can

NOT be recharged)

Yes (Compatible but can

NOT be recharged)

18650 Rechargeable Li-ion battery

18650 3.7V

Yes (Compatible and

can be recharged)

Rechargeable Li-ion battery *

RCR123

3.7V

20151103

Please find us on facebook:

NITECORE Flashlights

MH40GT

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore MH40GT Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore MH40GT Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Beoordeling

Veelgestelde vragen over Nitecore MH40GT Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Nitecore HC60 V2 Zaklamp

Handleiding

Nitecore MH12SE Zaklamp

Handleiding

Nitecore DL10 Zaklamp

Handleiding

Nitecore MH12 V2 Zaklamp

Handleiding

Nitecore NM02 Zaklamp

Handleiding

Nitecore HC68 Zaklamp

Handleiding

Nitecore EDC35 Zaklamp

Handleiding

Nitecore NU40 Zaklamp

Gerelateerde categorieën