Handleiding Sunding SD-576B Fietscomputer

Handleiding

In ODO mode, press the LEFT button for 5 seconds to

set the ODO value. The initial value is 0000.0. when

one figure flashes, press the RIGHT button to adjust it,

and the LEFT button to confirm and start to set the

next figure. NOTE: Before re-installing the battery,

take a note of yourmileage and then re-enter the value

once the battery is replaced.

Setting the Last value of Odometer

Accessories

Malfunctions and Problems

Button Instruction

Freeze Frame Memory

Sleep Mode

Trip Time

Average Speed

Maximum Speed (MXS)

Reset of Mileage Parameter

In ODO mode, press and hold both the RIGHT and LEFT buttons

simultaneously for 5 seconds to clear the tyre circumference and (km/m)

setings. The clock settings will remain unchanged.

Speedometer

In ODO mode, the total distance is indicated

on-screen.

The mileage range is 0.001~99999 km(m). The

display will return to 0 when the value exceeds its

maximum limit,press the RIGHT button to enter DST mode.

Speed is shown at all times on-screen, its maximum reading is

99.9km/h(m/h), and is accurate to +/- 0.1 km/h (m/h).

Speed Comparator

During riding, ‘+’ and ‘-’ indicates the current speed

is higher or lower than the average speed (AVS).

Odometer

Trip Distance (DST)

In DST mode, the distance for one trip is indicated

on the bottom line. DST ranges from 0~9999 km(m).

When the value exceed the range limit, it resets to 0

automatically. Both the time and the distance records

will be cleared when the time of one trip exceed the

range limits.Press the LEFT button for 5 seconds to

clear the records of DST, MXS, AVS and TM.

Press the RIGHT button to enter MXS mode.

In MXS mode, maximum speed is indicated on the

bottom line. Press the LEFT button for 5 seconds to

clear the records of MXS, DST, AVS and TM.

In AVS mode, average speed is indicated on the

bottom line.Press the LEFT button for 5 seconds to

clear the records of AVS,DST, MXS and TM.

Press the right button to enter TM mode.

In TM mode, trip time is indicated on the bottom line.

TM ranges from 0:00:00 to 99:59:59, and will be reset

to 0 when the value exceed the limit.

Press the LEFT button for 5 seconds to clear the

records of TM,DST, MXS and AVS.

Press the RIGHT button to enter SCAN mode.

Scan

In SCAN mode ,DST, MXS, AVS and TM modes are

indicated in turn every 4 seconds.

Press the RIGHT button to enter CLOCK Mode.

If no signal has been received for 300 seconds, the computer will enter

into Sleep Mode, the CLK value remains stored. It will turn back to the

previous mode with allthe data collected when the signal is received again

or any button is pressed.

Press the LEFT button at any time to enter into freeze frame memory

mode. FlashingTM data will appear on the screen. Press the RIGHT

button to view the records of DST, MXS, AVS and TM.

Press the RIGHT button to choose any mode below : ODO, DST, MXS,

AVS, TM, SCAN (DST, MXS, AVS & TM) and CLOCK. It is not necessary

to press the LEFT button except to select the Freeze frame Memory

mode.

In Freeze Frame Memory mode, press the RIGHT button, data will be

displayed, press LEFT button once more to return back to other modes.

Malfunction

Problems

No speedometer

Incorrect magnet / sensor alignment.

Inaccurate value is

indicated

Improper input, such as wheel

circumference.

Slow display response

Temperature exceeds operating limits

(0°C~55°C).

Black display

Temperature too high, or placed in direct

sunlight for too long. Let the unit cool

down.

Weak display

Poor battery contact or dead battery.

Display shows irregular

figures

Take out battery and re-install after 10

seconds.

Sensor Transmitter

Mounting Shoe

Cable Ties

Wheel Magnet

Battery (3V / CR2032)

Back Light

The back light function is switched on or off when you press any button

during 18:00~06:00.Itwill not work at any other time.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sunding SD-576B Fietscomputer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sunding. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sunding SD-576B Fietscomputer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sunding Fietscomputers
Meer handleidingen voor Fietscomputers

Veelgestelde vragen over Sunding SD-576B Fietscomputer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Sunding SD-548A Fietscomputer

Handleiding

Sunding SD-576A Fietscomputer

Handleiding

Sunding SD-565 Fietscomputer

Handleiding

Sunding SD-548B Fietscomputer

Handleiding

Sunding SD-568 Fietscomputer

Handleiding

Sunding SD-560 Fietscomputer

Handleiding

Sunding SD-201A Fietscomputer

Handleiding

Sunding SD-531 Fietscomputer

Gerelateerde categorieën