Handleiding Tunturi J4F Loopband

Handleiding

GB

3

OWNER'S MANUAL • J4F

HANDRAILS

Connect the wires before you assemble the

handrails. Secure each handrail with four washers

and bolts.

NOTE: Do not tighten these bolts until

the horizontal handlebar and monitor have been

secured.

HORIZONTAL HANDLEBAR

The horizontal handlebar (rod) is tapered on one

side. Insert the tapered end of the rod into the

right handrail before fi tting the rod into the left

side.

NOTE: the left side is secured with the long

bolt while the right ride is secured with the short

bolt. Do not tighten these bolts until the monitor

has been secured.

MONITOR

Connect the wire. After connecting the wire thread

it into the handlebar then push the monitor onto

the handrails. You may have to shake the handrails

from side to side to get the monitor to fi t. Once

you have the monitor in place, secure and tighten

the bolts on the monitor. Tighten all bolts. Remove

the protective fi lm from the display.

POWER CORD AND GROUNDING

INSTRUCTIONS

Plug the socket end of the power cord into the

treadmill at the left front corner. Before connecting

the device to a power source, make sure that

local voltage matches that indicated on the type

plate. The treadmill operates at 230 V or 120 V.

Turn on the power using the switch next to the

socket on the treadmill. This treadmill must be

grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for

electrical current to reduce the risk of electrical

shock. This product is equipped with a cord

having an equipment-grounded conductor and a

grounding plug. The plug must be plugged into

an appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances. Do not use extension cables when

connecting the equipment to the power source.

DANGER! Improper connection of the

equipment-grounding conductor can result in

a risk of electric shock. Check with a qualifi ed

electrician or serviceman, if you are in doubt as to

whether the product is properly grounded. Do not

modify the plug provided with the product - if it

will not fi t the outlet, have a proper outlet installed

by a qualifi ed electrician.

If the product is for use on a nominal 120-volt

circuit, it has a grounding plug that looks like

the plug illustrated. Make sure that the product

is connected to an outlet having the same

confi guration as the plug. No adapter should be

used with this product.

SAFETY TETHER KEY

The treadmill cannot be used if the tether key

is not properly installed on the meter; if the

key is removed from its place, the treadmill will

immediately stop. Insert the safety tether key into

the key holder at the left side of the meter. Ensure

that the clip of the safety tether key is properly

attached to your clothing; as the cord tightens,

make sure the clip does not detach itself from your

clothing before the safety tether key disconnects

from the user interface. Always hold the handrail

for support when getting off the treadmill. Do not

jump off the running belt while it is moving!

METER

FUNCTION KEYS

SELECT

Before you press the Start key, Select key selects the

training modes (Manual / HRC) or programs.

ENTER

Confi rm your selections (training mode or

program, user set-ups)

START

Starts the selected training and activates the

running belt at the speed of 1,0 km/h / mph.

TUNTURI_J4F_manual 3 31.10.2002, 15:34:25

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Tunturi J4F Loopband. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Tunturi. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Tunturi J4F Loopband in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Tunturi Loopbanden
Meer handleidingen voor Loopbanden

Beoordeling

Veelgestelde vragen over Tunturi J4F Loopband

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Tunturi J880 Loopband

Handleiding

Tunturi J620 Loopband

Handleiding

Tunturi J7F Loopband

Handleiding

Tunturi T60 Loopband

Handleiding

Tunturi Pure Run 6.0 Loopband

Handleiding

Tunturi FitRun 30 Loopband

Handleiding

Tunturi T10 Loopband

Handleiding

Tunturi J220 Loopband

Gerelateerde categorieën