®
The All-Round Flashlight Expert
Portable Camping light
User Manual
LR30
Features
·White/red dual light sources
·Utilises 6 high performance white LEDs and a red LED
·Dual lighting modes: White illumination (3 adjustable brightness) and red illumination
(Includes constant, blinking and SOS)
·Powered by a single 18650 or 2 x CR123 or 2 x RCR123 batteries
·Single switch design offers easy one handed operations
·Takes advantages of highly translucent diffuser, allowing all light source to be well
distributed
·Built-in power indicator reports remaining battery power (Patent No. ZL201220057767.4)
·Built-in power indicator doubles as positioning medium
·High efficiency constant current circuit
·Electrical reverse polarity protection
·Magnetic base
·Made from durable PC materials
·Waterproof in accordance with IPX6
·Impact resistant to 1.5 metre
Dimensions
Size：3.62” ×1.72” ×1.24”
Weight: 2.18oz (62gram) (without battery)
Battery Options
Output & Runtime
Power Tips
Upon battery installation, the built-in power indicator will blink to report battery voltage
(accurate to 0.1V). For instance, when battery voltage is measured at 4.2V, the power
indicator will blink 4 times followed by a short pause, then another 2 blinks.
Positioning
With the light turned on, hold down the power button for 3 second turns the light off, which in
turn activates the power indicator to blink once every 2 seconds, this serves to remind users
the location of the LR30. With a fully charged 18650, the LR30 will remain operational for 6
months with the power indicator activated, and 12 months in standby with the power indicator
deactivated.
Precautions
1. DO NOT insert batteries backward, doing so renders the product inoperative.
2. Always use quality batteries, and remove batteries from the product when it will be left
unattended for extensive period.
3. Avoid direct eye exposure
4. DO NOT disassemble, modify the product, it may damage the product and void its product
warranty
5. All modes will be inoperative with the exception of “Low” when battery level drops below
10%.
Replacing Batteries
Batteries should be replaced when output appears to be dim and unresponsive, or when the
power indicator is blinking rapidly.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any
problem covered under warranty occurs, customers can contact their dealers or distributors in
regards to their warranty claims, as long as the product was purchased from an authorized
dealer or distributor. NITECORE’s Warranty is provided only for products purchased from an
authorized source. This applies to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning
NITECORE® products can be repaired free of charge for a period of 60 months (5 years) from
the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the
cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified
by unauthorized parties, or damaged by batteries leakage.
For the latest information on NITECORE® products and services, please contact a local
※All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the
content of this document at any time without prior notice.
NOTICE:
The stated data has been measured
in accordance with the international
flashlight testing standards
ANSI/NEMA FL1, using 1 x Nitecore
18650 battery (3.7V, 3400mAh) or 2 x
CR123 batteries (3V, 1700mAh) under
laboratory conditions. The data may
vary in real-world use due to different
battery use or environmental
conditions.
*The runtime for "High" measured in the
chart includes the runtime for when
brightness is adjusted from "High" to
prevent overheating.
Operating Instructions
Battery installation
Insert one 18650 or two CR123/RCR123 batteries with polarities
pointing toward the right direction, as marked inside the battery
compartment.
Note: Upon battery installation, the built-in power indicator will blink
to report battery power, for more information, please refer to the
“Power Tips” section.
Accessories
Waterproof ring
4.2V3.5V 3.7V 3.9V
Low Power Full Power
6.4V4.8V 5.6V 6.0V
Low Power Full Power
18650×1:
CR123×2:
HIGH MID LOW RED
LUMENS
85
LUMENS
205
LUMENS
12
LUMENS
45
8
h
30
min
*3
h
30
min
8
h
62
h
6
h
*2
h
30
min
5
h30min
46
h
20m
(Beam Diameter)
IPX6
(Rated)
1.5m
(Impact Resistant)
2×CR123
18650
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
20161018
TYPE
Nominal voltage
Compatible
Primary Lithium battery *
CR123 3V
Yes
Yes
18650 Rechargeable Li-ion battery
18650 3.7V
Yes (Recommended)
Rechargeable Li-ion battery *
RCR123
3.7V
ON/OFF
Hold down the power button to switch the light on, hold down the button again to switch it off.
Brightness Adjustment
With the light turned on, tap the power button repeatedly to cycle through Low-Mid-High.
Note: The LR30 will automatically lower its output from “High” after 10 minutes to prevent
overheating and extend battery life.
Red Lighting (Red Illumination/Red Flashing/SOS)
With the light turned off, press the power button twice to turn the red LED on, press the power
button to cycle through Red Flashing-SOS-Red Illumination.
Please find us on facebook:
NITECORE Flashlights
Praat mee over dit product
Laat hier weten wat jij vindt van de Nitecore LR30 Zaklamp. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.